742795
11
Zoom out
Zoom in
Previous page
1/16
Next page
Operating instructions, Comfort 880, 881 (#103608 – GB) 11
4.4 Adjusting the height of the motor unit
4.4 / 1
16-30
The height of the motor unit can be adjusted using the heavy-duty wall
plugs.
4.5 Mounting the reference point magnet
WARNING!
Danger of injury due to uncontrolled movement of the
gate!
To avoid injury, the gate must have a mechanical end stop in both
directions; otherwise it could spring out of line.
The operator system determines the extent of travel and the gate
positions electronically. To do so, it requires a reference point on the
gate or the toothed rack. A special reference point magnet is used as
the reference point.
NOTICE
Malfunctions due to incorrect installation of the reference
point magnet!
Measuring the gate operator reference point can be interfered
with or prevented by the presence of old magnets and incorrect
installation clearances. To prevent faults:
Removeanyexistingmagnets(e.g.inthecaseofretrot
measures with an existing toothed rack).
Ensure that there is a distance between the reference point
magnet (A) and the motor unit (B) of 2-6 mm.
The distance between the centre of the magnet (A) and the
centre of the spur gear (C) must be 70 mm.
4.5 / 1
7063
2 – 6
A
B
C
4.3 / 11
Close the gate 500 mm further at a time.
Screw the toothed rack to each closed gate section in turn, as
shown on the relevant drill pattern.
NOTICE
Malfunctions due to incorrect installation of the toothed
rack!
If the adjustment between the toothed rack and the spur gear is too
tight, the operator system could jam and become damaged during
gate movement.
Ensure that a clearance of 1 to -2 mm is maintained between the
toothed rack and the spur gear.
4.3 / 12
1 – 2
Lower the motor unit by 1 to 2 mm.
“4.4 Adjusting the height of the motor unit“
CHECK
A functional check must be carried out to ensure that the toothed
rack is engaged with the spur gear along its entire length:
Ensure that the gate operator is unlocked (released).
“5.2 Emergency operation“
Move the gate slowly by hand into the OPEN and CLOSED end
positions.
The spur gear must be propelled by the movement of the gate.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 880 in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 880

Marantec Comfort 880 User Manual - German - 16 pages

Marantec Comfort 880 User Manual - Dutch - 16 pages

Marantec Comfort 880 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info