Menu 4: Operating modes
Menu 5: Function of the direction command transmitter
Menu 6: Function of the impulse command transmitter
Gate movement, OPEN Gate movement, CLOSE
A2 Gate reverses a little
1
Gate reverses a little
1
B2 Gate reverses a little
1
Gate reverses completely
2
C2 Gate reverses completely
2
Gate reverses a little
1
D2 Gate reverses completely
2
Gate reverses completely
2
1
Gate reverses a little: The drive system moves the gate a short distance in the opposite direction in
order to free an obstacle.
2
Gate reverses completely: The drive system moves the gate to the opposite end position.
Menu 2: Closing safety edge device
OPEN CLOSE
A4 press and hold press and hold
B4 automatic closing press and hold
C4 press and hold automatic closing
D4 automatic closing automatic closing
Direction command transmitters Explanations
A5 not active
The direction command transmitters only give a command
when the gate is stationary.
B5 STOP only
A moving gate is stopped by every direction command
transmitter.
Impulse command transmitters Explanations
A6 not active
The impulse command transmitters only give a command
when the gate is stationary.
B6 STOP only, then standard sequence
A moving gate is stopped by every impulse command trans-
mitter. The next command starts the drive system running in
the opposite direction (OPEN - STOP - CLOSE - STOP - OPEN).
9. Extended operator functions
52 Manual for installation and operation, Comfort 870 GB (#81125)
