742792
10
Zoom out
Zoom in
Previous page
1/20
Next page
10 Operating instructions, Comfort 860, 861 (#119162 – EN)
3.3 Installing the motor unit
Before installing the motor unit, check whether the possible
heightadjustmentofthemotorunitissucientforthe
situation on site, or if the motor unit needs to be raised on a
backplate.
Align the motor unit parallel to the gate.
“3.5 Adjusting the height of the motor unit”
Drill the holes for the wall plugs as shown in the drill pattern
provided.
Route the control cable and the power supply cable to the
installation position.
“3.2 / 2”
“4.2 Open the motor unit”
3.3 / 1
ø 10
40
50
3.3 / 2
3.3 / 3
“4.3 Close the motor unit”
3.4 Mounting the toothed rack
If the toothed rack has already been mounted, this step is not
necessary.
Conditions for mounting:
The motor unit has been mounted.
The motor unit is unlocked (released).
“4.5 Emergency operation”
NOTICE
Material damage due to incorrect installation of the toothed
rack!
Anincorrectlyttedtoothedrackcanresultindamagetothe
gate system and the gate operator. To prevent damage:
Ensure that screws (A) do not obstruct the operation of the
gate (e.g. by extending into the path of the gate rollers (B)).
Ensure that the spur gear (C) is not touching the gate.
The spur gear (C) should not be at its lowest possible position
(itmustbepossibletolowerthespurgearby1to2mmafter
thetoothedrackassemblyhasbeeninstalled).
3.4 / 1
A
BB
BB
C
D
• Determine the installation position of the toothed rack on the
gate.
• Adjust the motor unit to the appropriate height.
“3.5 Adjusting the height of the motor unit”
Thetoothedrackcanbeadaptedtotthegatewiththeaidofa
backplate (D).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 860 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 860

Marantec Comfort 860 User Manual - German - 20 pages

Marantec Comfort 860 User Manual - Dutch - 20 pages

Marantec Comfort 860 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info