742788
5
Zoom out
Zoom in
Previous page
1/32
Next page
3. General safety advice
Operating Instructions, Comfort 850, 851 GB (#114940) 5
Please read carefully!
Information on installing the operator system
• Ensure that the gate is in good mechanical condition.
• Ensure that the gate can stop in any position.
• Ensure that the gate can be easily moved in the OPEN and CLOSE
directions.
• Ensure that the gate opens and closes properly.
• Remove all unnecessary components from the gate (e.g. cables,
chains, brackets).
• Render any installations inoperable that will no longer be needed
after the operator system has been installed.
• Before commencing cabling works it is very important to disconnect
the operator system from the electricity supply.
Ensure that the electricity supply remains disconnected throughout
the cabling works.
• Adhere to the local protection regulations.
• Lay the electricity supply cables and control cables; these MUST be
laid separately. The controls voltage is 24 V DC.
• Install the operator system with the gate in the CLOSED position.
• Install all the impulse transmitters and control devices (e.g. remote
control buttons) within sight of the gate and at a safe distance
from the moving parts of the gate. A minimum installation height
of 1.5 m must be observed.
• Ensure that no part of the gate extends across public footways or
roads when the installation is complete.
Information on commissioning the operator system
After initial operation, the persons responsible for operating the gate
system, or their representatives must be familiarised with the use of
the system.
• Make sure that children cannot access the gate control unit.
• Before moving the gate, make sure that there are neither persons
nor objects in the operating range of the gate.
• Test all existing emergency command devices.
• Never insert your hands into a running gate or moving parts.
• Pay attention to any parts of the gate system that could cause
crushing or shearing damage or accidents.
The EN 13241-1 regulations must be observed.
Information on servicing the operator system
Maintenance work by the operator
Damage or wear to a door system must only be rectified by qualified
and trained professionals.
To ensure fault-free operation, the door system must be inspected
regularly and, if necessary, be repaired. Before starting work on the
door system, the operator system must always be disconnected from
the power supply.
• Check once a month that the operator system reverses when the
door touches an obstacle. To check this, place an obstacle, 50 mm
in height, in the path of the door in the direction of travel.
• Check the settings of the automatic cut-out in the OPEN and
CLOSE directions.
• Check all the moving parts of the door system and door operator
system.
• Check the door system for signs of damage or wear and tear.
• Move the door manually to check that the door travels easily and
smoothly.
• Check all power supply cables for signs of damage.For safety
reasons, if the power supply cable is damaged it must be replaced
by the manufacturer or the manufacturer’s customer service
department, or by a similarly qualified person.
Maintenance work by qualified and trained professionals
Power-operated windows, doors and gates must be inspected by
qualified and trained professionals whenever necessary, but at least
once a year (written inspection records must be kept).
• Test the driving power with a force tester designed for this
purpose.
• Replace any damaged or worn parts.
Information on cleaning the operator system
Life-threatening danger due to electric shock!
• It is vital that you disconnect the operator system from the power
supply before cleaning. Take measures to ensure that the power
supply remains disconnected for the duration of the cleaning
operation.
Damage resulting from incorrect operation!
When cleaning the operator system, never use:
direct water jets, high pressure cleaners, acids or alkaline solutions.
• Clean the outside of the housing using a damp, soft cloth that
does not shed fibres.
If particularly dirty, the housing can be cleaned using a mild
detergent.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 850 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 850

Marantec Comfort 850 User Manual - German - 32 pages

Marantec Comfort 850 User Manual - Dutch - 32 pages

Marantec Comfort 850 User Manual - French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info