742787
31
Zoom out
Zoom in
Previous page
1/52
Next page
9. Programming
Installation and operating instructions Comfort 830 GB (#70676) 31
The programming of the "end position OPEN" and
"end position CLOSED" can be carried out in two ways:
Advice:
The control unit travels without
press-and-release.
1. Coarse adjustment by permanently holding
a button
The setting is carried out when button + or - is pressed
permanently.
The door travels correspondingly to the OPEN or
CLOSED position.
2. Fine adjustment by a short button impulse
The setting is carried out by a short button impulse
on button + or -. The door does not move during this
procedure.
Every time the button is pressed the end position is
shifted by 4 mm to the respective direction.
To test the end position, the door has to be traveled
over the reference point to the OPEN position or to the
CLOSED position.
During the button impulse the LED 7
is flashing quickly.
9.1.3 Setting the door positions
The following is displayed:
In operating mode
The LED shortly lights up when the reference
point is passed
In programming mode
The operator is between the reference point
and the end position OPEN.
The operator is between the reference point
and the end position CLOSED.
9.1.2 Reference point
Legend:
LED off
LED on
LED flashing slowly
LED flashing quickly
Advice:
The control unit can only be
programmed when the reference point
has been passed electrically.
Therefore the door has to be travelled
1x to the end position OPEN and 1x to
the end position CLOSED before first
programming.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 830 in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 830

Marantec Comfort 830 User Manual - German - 52 pages

Marantec Comfort 830 User Manual - Dutch - 52 pages

Marantec Comfort 830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info