742787
5
Zoom out
Zoom in
Previous page
1/52
Next page
Installation and operating instructions Comfort 830 GB (#70676) 5
Advice for installation of the operator
Make sure that the door is in mechanical good condition.
Make sure, that the door is balanced.
Make sure that the door opens and closes correctly.
Remove all components that are not required (e.g. cords, chains, angles etc.).
Switch off all devices which will not be needed after the operator is installed.
• Before cabling works the operator has to be disconnected by all means from power supply and a waiting time
of 10 sec. has to be kept in order to be sure that the operator is without power.
• Observe the local safety regulations.
Always lay mains and control cables separately. The control voltage is 24 V DC.
Only mount the operator when the door is closed.
• Install all impulse and control devices (e.g. RC code keypad) within sight to the door and in a safe distance to
movable parts of the door. A minimum mounting height of 1,5 m has to be kept.
Following installation, ensure that door parts do not protrude onto public footpaths or streets.
Advice for initial operation of the operator
After initial operation, the door system operating personnel or their proxies must be familiarised with the use of the
system
Make sure that no child will play with the door control unit.
• Before movement of the door make sure that there are neither persons nor objects in the operating grange of the
door.
Test all existing emergency command devices.
Never insert your hands into a running door or moving parts.
Advice for maintenance of the operator
To guarantee a function without faults, check and, if necessary, repair the following points. Always disconnect
the operator from power supply before carrying out any works at the door system.
• Check monthly whether the operator reverses as soon as the door meets an obstacle. For this put a 50 mm wide
obstacle in the door travel path.
Check the settings of the "OPEN" and "CLOSE" automatic cut-out function.
Check all movable parts of the door and operator system.
Check the door system for signs of wear or damages.
Check whether the door can be easily moved by hand.
Advice for cleaning the operator
For cleaning never use: direct jet of water, high pressure cleaner, acids or lye.
Clean the operator with a dry cloth if necessary.
Please read carefully!
3. General safety advice
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 830 in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 830

Marantec Comfort 830 User Manual - German - 52 pages

Marantec Comfort 830 User Manual - Dutch - 52 pages

Marantec Comfort 830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info