742785
11
Zoom out
Zoom in
Previous page
1/16
Next page
Operating instructions, Comfort 585, 586 (#102836 – GB) 11
4.11 Connecting to the junction box
NOTICE
Incorrect storage or installation of the junction box can
cause damage!
The operator housing is designed to permit water to ingress into
the housing. If the junction box is stored in the operator housing,
the electrical connections in the junction box may therefore become
corroded.
Make sure that the junction box is not stored inside the operator
housing.
4.11 / 1
Install the junction box at least 100 mm above the roadway.
Thread the connection cables from the motor unit through the
cable gland and into the junction box housing.
Attach the connection cables as required.
“4.12 / 1”
4.9.2 / 2
QR
S
Loosen screws (Q) and (R).
Rotate the cam (S) as far as it will go with the aid of the connecting
rod.
Tighten screws (Q) and (R).
The gate wing opening can be adjusted by setting the cam (Q).
4.10 Completing the installation
Close the operator housing with the cover plate.
Screw down the cover plate.
CHECK
To ensure that installation is correct, the following tests must be
carried out:
Release the operator.
“5.2 Release mechanism”
Move the gate slowly by hand into the OPEN and CLOSED end
positions.
4.10 / 1
J
Lubricate the wing device through the lubricating nipple (J) until
grease escapes on both sides
(grease DIN 51502 KP 2 N - K 2 K-20).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 586 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 586 in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 586

Marantec Comfort 586 User Manual - German - 16 pages

Marantec Comfort 586 User Manual - Dutch - 16 pages

Marantec Comfort 586 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info