Operating Instructions, Comfort 580 GB (#91636) 15
6. Installation
6.6 / 1
6.6 Fixing the control unit
6.5 Release
• Open the control unit.
• Mount the control unit using the spacer elements (A).
3.5 x 32
Attention!
The control unit must be installed in
such a way that the motor cable can be
fed through the screw fixing at the
base of the control unit.
6.6 / 2
A
Reference:
Mounting the telescopic arm is
described in Section 6.4.
Releasing
• Remove the screw (A) and the spacer.
• Pull out the telescopic arm (B).
• Lift the remaining section of the telescopic arm off
the motor unit.
6.5 / 1
B
A
Tip:
If the telescopic arm can not be
separated from the motor unit, an
M12 x 35 screw can be screwed into
the screw thread (C). This will lift the
telescopic arm off the motor unit.
Before mounting the telescopic arm on
the motor unit again, this screw must
be removed.
The motor unit is now no longer coupled to the gate.
The gate can be moved manually.
Locking
To couple up the gate again, the telescopic arm must
be mounted on the motor unit again and fixed to the
bracket.
C