742777
25
Zoom out
Zoom in
Previous page
1/76
Next page
English / Page 25
GB
F. Installation
A02 Post pivot
A04 Door wing pivot, door position closed
A06 Post support bracket
A07 Door support bracket
A09 Hexagonal nut M 8
Select the required bore hole on the 2-hole post support bracket (A06).
Insert the 'post pivot' threaded bolt (A02) of the operating head in the post
support bracket (A06).
Secure the bold with a nut (A09).
Close the door and move the carriage until almost fully extended
(default position).
Check the support bracket position on the door wing.
Insert the 'door pivot' threaded bolt (A04) of the operating head in the door
support bracket (A07).
Secure the bold with a nut (A09).
Activate the emergency unlocking device (see section 8).
Open the door manually into the 'OPEN' position.
Check the end of travel position.
Drill the required holes in the door wing. Hole ø 10 mm.
Attention!
Make sure that the operator is installed levelly!
Screw on the support bracket.
Tighten the hexagonal nut M 8 (A09) on the post support bracket and on the
door support bracket so that the screw can be easily loosened.
Advice:
For steel wings:
The hole ø is 6.8 mm; in addition, a M8 thread must be cut in
(see section 6.1).
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 520 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 520

Marantec Comfort 520 User Manual - German - 76 pages

Marantec Comfort 520 User Manual - German - 76 pages

Marantec Comfort 520 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info