742776
5
Zoom out
Zoom in
Previous page
1/16
Next page
Operating instructions, Comfort 516 (#102312 – GB) 5
4. Installation
DANGER!
Life-threatening danger due to electric shock!
It is vital that you disconnect the operator system from the
power supply before commencing cabling work. Take measures
to ensure that the power supply remains disconnected for the
duration of the work.
Observe the local safety regulations.
It is imperative that you lay power cables separately from control
cables. The control voltage is 24V DC.
NOTICE
Material damage resulting from incorrect installation of the
operator!
To avoid installation errors and damage to the gate or operator
system, the following installation instructions must be observed at all
costs.
Ensure that the gate is in good mechanical order:
The gate can be moved easily.
The gate opens and closes properly.
When installing the operator system, the gate must be in the
closed position.
Onlyusexingmaterialsthataresuitableforthefoundation
material in question.
NOTICE
Material damage may result from improper care of drive!
Grease and oil can attack the plastic materials of the drive system
and lead to the plastic becoming cracked and fractured. To prevent
damage, the drive system must not be oiled or greased.
4.1 Preparing for installation
Before commencing installation, the following works must be carried
out without fail.
Supply package
Check that all the parts are present.
Check that all the necessary accessory parts for your installation
situation are present.
Gate system
Ensure that a suitable mains connection and a mains isolator
switchareavailableforyourgatesystem.Theminimumcross-
sectionoftheearthcableis3x1.5mm2.
Ensure that all cables are suitable for outdoor use with respect to
UV resistance and cold resistance.
Ensure that a suitable control unit is available for your gate system.
Ensure that in the case of double wing gate systems a line from the
operatortothecontrolsisavailableon-site.
Theminimumcross-sectionofthecablemustbe6x0.75mm2.
Ensure that your gate system has a gate stop in the CLOSE
direction.
Disassemble the gate latches or render them inoperable.
Ensure that the gate can be easily moved by hand.
Please note the gate requirements:
„11.1 Technical data“
For gate wing widths of 2 metres or more, the use of an electric lock is
recommended.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 516 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 516

Marantec Comfort 516 User Manual - German - 16 pages

Marantec Comfort 516 User Manual - Dutch - 16 pages

Marantec Comfort 516 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info