742621
30
Zoom out
Zoom in
Previous page
1/92
Next page
English Page 30
O
14
Factory-fitted bridged clamps, programming buttons
Description
button
'stop'
botton 'stop'
photocell
driveway
button
'impulse'
terminal block
X2e
X5
KL
X2e
bridged clamps
12 - 13
-
-
a
programming buttons
-
S18
S20
-
Attention:
Low voltage! External voltage at the plug terminals X3a, X4a or screw clamp X3C will
completely destroy the whole electronics.
Observe the local safety regulations!
Always lay mains supply cables and control cables separately.
Control voltage 24V DC
Motor voltage 40V DC
Connection of external control elements
Connect external control elements according to cable connecting plan, point 13.
Cable connecting plan
F1 fuse 1A max.
F2 fuse 4A max.
H4 LED reference point
H20 light on building,
flashing light, revolving beacon
(250V, 60W max)
K1 main current safety relay 'open' for door 1
K2 main current safety relay 'close' for door 1
K3 main current safety relay 'open' for door 2
K4 main current safety relay 'close' for door 2
K5 main current safety relay for magnetic lock
K6 main current safety relay for light
K11 magnetic lock door 1 *
K12 magnetic lock door 2 *
KE External receiver (if available) at
impulse operation bridge a
KL photocell driveway
M1 motor 36V DC, door 1
M2 motor 36V DC, door 2 (only for
double-wing version)
S mains isolator switch or button
'emergency cut-out'
S0 button 'stop'
S1 button 'impulse' door 1 and door 2 *
S2 button 'open' door 1 and door 2 *
S4 button 'close' door 1 and door 2 *
S5 button 'impulse' door 1
S18 programming switch 2, stop button
S20 programming switch photocell KL
S21 reed-contact reference point door 1
S22 reed-contact reference point door 2
S23 switch for single-wing and double-
wing version
T1 transformer
X1 safety socket
X1a safety plug
X2a plug mains connection
X2b plug for lighting on building
X2c plug for motor connection door 1
X2d plug for motor connection door 2
X2e plug for connection of button 'open',
'stop', 'close'
X2f plug for connection of button
'impulse' door 1
X2g plug for connection of photocell
X4 plug for 'electronic aerial'
X5 plug for connection of button 'open',
'stop', 'close'
X6 Relay potential-free limit switch
information
* if available
O
13
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 510S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 510S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 510S

Marantec Comfort 510S Installation Guide - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info