680457
18
Zoom out
Zoom in
Previous page
1/24
Next page
18 Operating instructions, Comfort 50, 60 (#104172 – GB)
6.1 Hand transmitter
The operator works with the supplied hand transmitter on the basis of
a pulse sequence control system.
Operating the door using the hand transmitter
1. The control system is in
operating mode.
2.
1. Impulse:
The door opens and moves in
the OPEN direction
3. 2. Impulse.
The operator system stops.
4.
3. Impulse:
The door moves in the opposite
direction (CLOSE direction).
Transmitting the code (only multi-bit)
1. Connect the hand transmitter to
the transmission plug.
2.
Press the button on the master
transmitter.
Keep the button pressed.
The LED lights up.
3.
Press the button on the hand
transmitter which is to be given a
new code.
TheLEDashes.
4.
The LED lights up.
The coding procedure is
completed.
5. Remove the transmission plug.
For multi-button transmitters, each button can be programmed with a
different function.
Changing the code (only multi-bit)
1. Plug the transmission plug into the
hand transmitter.
2.
Short-circuit one of the two outer
pins with the centre pin adjacent
to it (e.g. using a screw driver).
3.
Press the desired button on the
hand transmitter.
TheLEDashes.
4.
The LED lights up.
The coding procedure is
completed.
5. Remove the transmission plug.
After the hand transmitter has been re-coded, the operator system
must also be re-programmed to respond to the new code.
For multi-channel transmitters, the programming process must be
carried out for each button separately.
Changing the battery
1.
1
Open the hand transmitter.
2. Replace the battery.
REFERENCE
For more information on the additional functions of the bi·linked
hand transmitter supplied, please refer to the relevant documentation.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 50 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 50

Marantec Comfort 50 User Manual - German - 24 pages

Marantec Comfort 50 User Manual - Dutch - 24 pages

Marantec Comfort 50 Installation Guide - Dutch - 24 pages

Marantec Comfort 50 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info