680457
5
Zoom out
Zoom in
Previous page
1/24
Next page
Operating instructions, Comfort 50, 60 (#104172 – GB) 5
3. Door system
Overview
3 / 1
3
1
12
4
This is just an example of a door system. The details can vary according
to the type of door and the associated equipment. The system shown
comprises the following components:
1 Photocell
2 Key switch
3 Free-standing post (for code keypad, transponder etc.)
4 Signal light
REFERENCE
For further information regarding accessory items, please see the
manufacturer’s website.
For the installation and cabling of the door sensors, control elements
and safety equipment, the relevant installation instructions must be
observed.
4. Installation
DANGER!
Life-threatening danger due to electric shock!
It is vital that you disconnect the operator system from the
power supply before commencing cabling work. Take measures
to ensure that the power supply remains disconnected for the
duration of the work.
Observe the local safety regulations.
It is imperative that you lay power cables separately from control
cables.
The control voltage is 24 V DC.
NOTICE
Material damage resulting from incorrect installation of the
operator!
To avoid installation errors and damage to the door or operator
system, the following installation instructions must be observed at all
costs.
Ensure that the door is in good mechanical condition:
The door remains stationary in every position.
The door can be moved easily.
The door opens and closes properly.
When installing the operator system, the door must be in the
closed position.
Install all impulse transmitters and control equipment (such as
radio code buttons e. g.) within sight of the door and at a safe
distance from the door’s moving parts. The installation height
mustbeatleast1.5metresfromtheground.
Onlyusexingmaterialsthataresuitableforthefoundation
material in question.
4.1 Preparing for installation
Before commencing installation, the following works must be carried
out without fail.
Supply package
Check that all the parts are present.
Check that all the necessary accessory parts for your installation
situation are present (e.g. operator boom).
Ensurethatsuitablexingmaterialsareavailableforyourparticular
installation situation.
Garage
Check to make sure that your garage has a suitable power
connection and a mains disconnection switch.
Door system
Remove any components (such as ropes, chains, brackets, etc.) from
the door that are no longer needed.
All equipment that will no longer be required after the door
operator system has been installed must be taken out of service.
For garages without a second entrance:
Fit the garage door with an emergency release mechanism so that
you can gain entry to the garage if there is a malfunction.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 50 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 50

Marantec Comfort 50 User Manual - German - 24 pages

Marantec Comfort 50 User Manual - Dutch - 24 pages

Marantec Comfort 50 Installation Guide - Dutch - 24 pages

Marantec Comfort 50 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info