636180
21
Zoom out
Zoom in
Previous page
1/36
Next page
Operating instructions, Comfort 360, 370, 380 (#101258 – EN) 21
EN
4.6.3 Checking the automatic cut-out
WARNING!
Risk of injury due to operation without automatic cut-out!
The drive is equipped with an automatic cut-out for personal
protection.
Only ever operate the product if the correct function of the
automatic cut-out is guaranteed.
Test the automatic cut-out with OPEN and CLOSE.
Commissionaqualiedspecialistwithtestingthedriving
power using a force tester designed for this purpose.
Automatic cut-out OPEN
Load the gate in the centre of the lower edge with a mass of
20kgduringthegaterun:
The gate must stop immediately.
Automatic cut-out CLOSE
Place a 50 mm tall obstacle on the ground.
Drive the gate over the obstacle:
The drive system must stop and reverse upon encountering the
obstacle.
The settings for the drive forces OPEN and CLOSE are retained if
the mains power is interrupted.
Only after a reset are the parameters restored to the factory
settings.
“Level1,Menu8-RESET”
4.6.4 Checking the photocell
Photocell
Check all photocells individually by triggering the function.
Check all connected photocells directly in front of the CLOSED
gate position.
Peculiarities with gate frame photocells
The function of a connected frame photocell must be realised
above the installation position. Beneath the installation
position, the function is suppressed by the controller.
If multiple photocells are connected, all photocells react in the
same way with a possible frame photocell.
4.6.5 Check the personnel door contact
Open the personnel door.
Move the gate: The drive system is not permitted to move.
4.7 Marantec Service Access (MSA)
The MSA prevents unauthorised persons from changing safety-
relevant values.
The following functions shall be programmed exclusively by
qualiedspecialistpersonnelwiththehelpoftheMSA:
Level 2 (drive settings)
Level 3 (automatic closing)
Level 6 (variable speeds)
Level 8 (system settings)
The drive stores the customer ID, which can be found on the rear of
the MSA.
4.7.1 Inserting the MSA
4.7.1 / 1
4.7.1 / 2
XB72
4.7.1 / 3
XB72
Service Access
dacb Rxx
xxxxxxx
IDXXXXX
Made in Germany
MSA
4.7.1 / 4
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 360 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 360

Marantec Comfort 360 User Manual - German - 36 pages

Marantec Comfort 360 User Manual - Dutch - 26 pages

Marantec Comfort 360 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info