636180
7
Zoom out
Zoom in
Previous page
1/36
Next page
Operating instructions, Comfort 360, 370, 380 (#101258 – EN) 7
EN
3. Installation
3.1 Safety instructions for installation
WARNING!
Danger due to a failure to observe the installation instructions!
This chapter contains important information for the safe
assembly of the product.
Read this chapter through carefully before assembly.
Follow the safety instructions.
Perform the assembly as described.
Assemblybyqualiedspecialistpersonnelonly.
“1.2.2Specialistpersonnel”
Electricalworkmustbeperformedbyqualiedelectricians
exclusively.
“1.2.2Specialistpersonnel”
Before assembly, it is necessary to make sure that the power
supply has been and remains disconnected. Only establish the
power supply when prompted to do so in the corresponding
assembly step.
It is essential to adhere to the local protection regulations.
It is essential that mains supply cables and control cables are
laid separately. The controls voltage is 24 v DC.
The gate must be in good mechanical condition:
The gate comes to a stop in any position.
The gate is easy to move.
The gate opens and closes correctly.
All pulse transmitters and control devices (e. g. remote control
buttons) must be installed within sight of the gate and at a
safe distance from the moving parts of the gate. A minimum
installation height of 1.5 metres must be observed.
Onlyusexingmaterialthatissuitablefortherespective
construction substrate.
3.2 Preparation for installation
Before starting installation, it is essential to perform the following
work.
Scope of delivery
Check which product variant you have, and ensure the scope of
delivery is complete.
Make sure that a suitable drive rail is available.
Check that you have all the accessory parts required for your
installation.
Garage
Check whether your garage is equipped with a suitable power
connection and circuit breaker.
2.5 Example application
2.5 / 1
1
4
1
3
2
The gate system is an example and may vary depending on gate
type and equipment. The system shown consists of the following
components:
1 Photocell
2 Key switch
3 Post (for code buttons, transponders, etc.)
4 Signal light
Further information regarding the accessories can be found on
the manufacturers website.
For the installation and cabling of the gate sensors, control
elements and safety equipment, the relevant installation
instructions must be observed.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 360 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 360

Marantec Comfort 360 User Manual - German - 36 pages

Marantec Comfort 360 User Manual - Dutch - 26 pages

Marantec Comfort 360 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info