636178
33
Zoom out
Zoom in
Previous page
1/36
Next page
Operating instructions, Comfort 260, 270, 280 (#100316 – EN) 33
EN
10. Troubleshooting
Faults without the error message display
LCD display has no display and does not light up.
Drive in standby mode.
Press an arbitrary button to put the drive into the
operating mode.
Note:
This can start the door moving.
Voltage missing.
Check whether mains voltage is present.
Check current connection.
Thermal contactor in mains transformer has
triggered.
Leave the mains transformer to cool down.
Controller unit defective.
Have the drive system checked.
No response after pulsing.
Connectionterminalsfor“Pulse”buttonbypassed,e.g.
throughlineshort-circuitoratterminal.
Possibly test-disconnect wired key switch or
internal push-button from the controller unit:
Unplug cable from socket XB03, insert short-
circuit plug and search for wiring fault.
“3.4.3Connectionofpotential-freebutton(XB03)”
No response after pulsing by hand-held transmitter.
Module receiver not plugged in.
Connect module receiver with controller unit.
“3.5Completingtheinstallation”
Hand-held transmitter coding does not match
receiver coding.
Reactivate hand-held transmitter.
“4.5Quickprogramming”
Hand-held transmitter battery empty.
Insert new battery.
“5.2Hand-heldtransmitter”
Radiooperationdeactivated(“externalbutton”symbol
ashes).
Press the + (OPEN) or – (CLOSE) button on the
drive to reactivate the radio.
Hand-held transmitter or controller electronics or
module receiver defective.
Have all 3 components checked.
Drive system reverses with interruption to frame photocell.
Programming was not performed correctly. Frame
photocellwasnotidentiedcorrectly.
Manually set the position of the frame photocell.
“Level8,Menu10-Positionoftheframephotocell”
Faults without the error message display
Low or no range.
Hand-held transmitter defective.
Check hand-held transmitter, replace if
necessary.
Antenna defective or installed incorrectly.
Check / replace antenna.
Lay antenna to the lintel or feed out of the garage,
if nec. install outside antenna.
Faults on frequency band used.
Switch to alternative frequency.
Drive lighting not working.
Bulb defective.
Replace LED.
With further faults.
Observe error message (see LCD display).
Have article no., production no. and version
to hand (see type plate) for any queries.
Reset and re-commissioning in accordance with
the operating manual.
Faults with error message display
The display shows detected faults with an
error number (example error number 7).
The controller switches to the message
mode.
In operating mode, pressing the P button
displays the most recent error number.
Error number 7
After 120 seconds without pressing a button,
programming mode switches off automatically.
Restart the programming procedure.
Error number 9
Speed sensor pulse not available,
drive system blocked.
Have the drive system checked.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 270 in the language / languages: English as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 270

Marantec Comfort 270 User Manual - German - 36 pages

Marantec Comfort 270 User Manual - Dutch - 26 pages

Marantec Comfort 270 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info