636178
24
Zoom out
Zoom in
Previous page
1/36
Next page
24 Operating instructions, Comfort 260, 270, 280 (#100316 – EN)
Level Menu
6
Variable
speed
1 Speed OPEN
2 Speed soft running OPEN
3 Soft running position OPEN
4 Speed CLOSE
5 Speed smart running CLOSE
6 Speed soft running CLOSE
7 Smart running position CLOSE
8 Soft running position CLOSE
9 Soft start time OPEN
10 Soft start time CLOSE
7
Service and
maintenance
1 Gate cycle counter
2 Maintenance counter
3 Maintenance interval
8 Reset service and maintenance
9 Fault indication
8
System settings
1 Photocell
2 Closing edge safety device
3 Automatic cut-out function
4 Operating modes
5 Function of the direction command
device
6 Function of the pulse command device
7 Force relief in the GATE CLOSED
position (back-jump)
8 Direction of rotation
10 Position of the frame photocell
4.8.3 Contents of the special functions
Level 1 – Basic functions
Menu 3 – Intermediate position OPEN
Setting with button + (OPEN) and – (CLOSE).
Closing function is possible with automatic closing.
It is only possible to use the most recently
programmed intermediate position.
Menu 4 – Intermediate position CLOSED
Setting with button + (OPEN) and – (CLOSE).
Closing function is not possible with automatic closing.
It is only possible to use the most recently
programmed intermediate position.
Level 1 – Basic functions
Menu 7 – Relay output
(only programmable with optional relay)
1
) Signal light (available / not available)
“Level3,Menu7-Signallight”
2 Gate position OPEN
3 Gate position CLOSED
4 Intermediate position OPEN
5 Intermediate position CLOSED
6 Drive system starts (wipe pulse 1 second)
7 Fault
8
Lighting time
“Level5,Menu4-Lightingtime”
9 Locking release (drive system running)
10 Locking release (drive system stationary)
11
Lock release (drive system starts /
wipe pulse 3 seconds)
12 Anti-opening mechanism
13
Radio remote control (relay switches for the
duration of the pulse)
“Level 4, Menu 8 - Drive lighting ON / OFF or
relayoutput”
14
Test pulse for closing edge safety device (relay
issues a test pulse and switches for 300 ms)
Menu 8 – RESET
The drive system can be reset to the factory settings.
After a reset of the control or replacement of the
control box, all desired individual settings must be
input again.
1 ) No reset
2
Reset control
(Connected modules (bus modules,
remote control) must be reset separately)
3 Reset remote control (telegrams are deleted)
4
Reset expansion automatic closing
“Level3-Automaticclosing”
5
Reset only expanded drive functions (apart from
gate position OPEN/CLOSE and remote control
pulse)
6 Reset safety elements (photocell / hold circuit)
7
Reset bus modules (connected bus modules are
taught)
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 270 in the language / languages: English as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 270

Marantec Comfort 270 User Manual - German - 36 pages

Marantec Comfort 270 User Manual - Dutch - 26 pages

Marantec Comfort 270 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info