636177
19
Zoom out
Zoom in
Previous page
1/36
Next page
Operating instructions, Comfort 260, 270, 280 (#100316 – EN) 19
EN
4.3 Status indication
Display Function / element
3
Battery backup connected (optional)
4
Pre-warning time display (only with
programmed automatic closing)
4.4 Factory settings
The drive can be restored to the factory settings with a reset.
“Level1,Menu8-RESET”
4.5 Quick programming
It is necessary to perform quick programming for correct
commissioning of the drive system and after a reset.
Preconditions:
The gate is in the CLOSED gate position.
The guide carriage is engaged.
“5.3Release”
If no button is pressed for 120 seconds in programming mode, the
controller changes back to operating mode.
A corresponding error number is displayed.
“10.Troubleshooting”
Perform the quick programming.
It is necessary to perform a functional test after quick
programming.
“4.6Functiontest”
NOTICE
Danger due to damaging the motor unit as a result of a collision
with the guide carriage!
When setting the OPEN gate position, the guide carriage must not
be driven to the end position at maximum speed!
Carefully drive the gate to the OPEN position at low speed.
Quick programming
1. Programming the gate position OPEN
Controller is in operating
mode.
P
P > 3 sec. < 10 sec.:
Start of quick programming.
Drive gate to OPEN position.
P
Save OPEN gate position.
2. Programming the gate position CLOSED
Drive gate to CLOSED
position.
P
Save gate position CLOSED.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 260 in the language / languages: English as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 260

Marantec Comfort 260 User Manual - German - 36 pages

Marantec Comfort 260 User Manual - Dutch - 26 pages

Marantec Comfort 260 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info