742761
18
Zoom out
Zoom in
Previous page
1/46
Next page
English Page 18
E. Hand transmitter
Hand transmitter - Programming:
Learn coding (if necessary)
This function is meant to transmit a code from an existing hand transmitter
to an additional hand transmitter (fig. E.4).
14
Advice!
Both sides of the plug connections can be used in an identical way.
Attention!
When actuating the hand transmitter, the door may be started!
Step 1:
• Connect both transmitters via the enclosed coding plug.
Step 2:
• Actuate the existing transmitter and hold the button. The LED in the
transmitter is glowing.
Step 3:
• Actuate the desired button on the new hand transmitter and still hold
the button of the existing transmitter.
After 1 - 2 sec. the LED on the new transmitter is on permanently.
The programming is terminated.
The new hand transmitter has now taken over the coding of the existing hand
transmitter.
• Take out the coding plug.
GB
English Page 75
H. Connection of the operator
Attention!
Low voltage!
External voltage at socket X30 will completely destroy the
electronics.
Attention!
Observe local safety regulations!
Lay power and control leads by all means separately.
Attention!
Observe local safety regulations!
Always lay mains cable and control cable separately.
Wiring diagram Comfort 257 Closing edge safety
device
V5 Optosensor transmitter 'grey'
V6 Optosensor receiver 'black'
X7c Socket optosensor coiled cable
X7e Socket optosensor receiver
X7f Socket optosensor transmitter
X7g Socket wicket door contact
X30 Socket optosensor
33.1
33
Connection control unit — door
A Contact bar operation direction CLOSE
B End resistance (integrated in contact bar)
C Contact bar operation direction OPEN
D End resistance (integrated in contact bar)
E Coiled cable system
33.2
18


Need help? Post your question in this forum.

Forumrules
1

Forum

marantec-comfort-257

Reset search

  • Hi
    in unser Gerage ist der Marantec Comfort 150 verbaut. Dieser war eine längere Zeit jetzt ausgeschaltet. Position ist auf "tor auf" aber der Motor zeigt die Postion "TOr zu" an. was kann ich machen?
    Submitted on 14-10-2022 at 15:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257

Marantec Comfort 257 User Manual - German - 46 pages

Marantec Comfort 257 User Manual - German - 46 pages

Marantec Comfort 257 User Manual - French - 46 pages

Marantec Comfort 257 Installation Guide - All languages - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info