We hereby declare that in its design and construction,
and in the form as delivered, the product mentioned
below complies with the relevant basic requirements of
the EC Machinery Directive (2006/42/EC).
This declaration shall no longer be valid if changes are
made to the product without our authorisation.
Product: Garage door operator
Comfort 220.2, 250.2, 252.2, 250.2 speed
In addition, the partly completed machinery is in
conformity with the EC Construction Products Directive
89/106/EC, the EC Electromagnetic Compatibility
Directive 2004/108/EC and the EC Low Voltage
Directive 2006/95/EC.
– Machinery Directive 2006/42/EC
Health and safety requirements applied according to
Annex 1:
General principles No. 1, No. 1.1.2, 1.1.3, 1.1.5,
1.2.1, 1.2.2, 1.2.3, 1.2.6, 1.3.1, 1.3.4, 1.3.7, 1.3.8,
1.3.9, 1.5.1, 1.5.4, 1.5.6, 1.5.8, 1.5.14, 1.71.6.1,
1.6.3, 1.7
EN 60204-1:2007
EN ISO 12100-1:2003
EN ISO 13849-1:2008
Cat. 2 / PLC for the functions of power limitation
and end position detection
EN 61508:2001
– EMC electromagnetic compatibility 2004/108/EC
EN 55014-1
EN 61000-3-2:2006 (2008)
EN 61000-3-3:2009
EN 61000-6-2:2006
EN 61000-6-3:2007
– Low voltage directive 2006/95/EC
EN 60335-1:2002
EN 60335-2-103:2004
The relevant technical documentation is compiled in
accordance with Annex VII(B) of the Machinery
Directive 2006/42/EC. We undertake to transmit, in
response to a reasoned request by the market surveil-
lance authorities, this information in electronic form
within a reasonable term.
Operating Instructions, Comfort 220.2, 250.2, 252.2, 250.2 speed GB (#83988) 37
11.2 Declaration of Incorporation
The machinery is incomplete and must not be put into
service until the machinery into which it is to be
incorporated has been declared in conformity with the
provisions of the Machinery Directive 2006/42/EC.
Scope of application of these installation instructions:
Production date 01.03.2012 - 31.03.2013
01.03.2012 ppa. K. Goldstein
Management
Person authorised to compile the relevant technical
documentation:
Marantec Antriebs- und Steuerungstechnik
GmbH & Co. KG
Remser Brook 11 · 33428 Marienfeld · Germany
Phone: +49 5247 705-0
11. Attachment