Manual Marantec Comfort 250 (page 31 of 88) (English)

742753

Zoom out

Zoom in

1/88

English Page 31

G. Display functions and programming possibilities

GB GB

4. Programming 'RESET factory settings'

LED 8 is flashing and all others are on:

• Press button 팬 or 팫 to go to function

'reset'.

LED 1 is flashing quickly; function 'no

reset' is selected.

All programmed values remain unchanged.

LED 1 is on; function 'reset' is selected.

All programmed values are overwritten by

the values set from factory.

• Press button 쒊 to confirm reset function.

When 'reset' has been selected, the control

unit carries out a new start, recognizable

by all LED's glowing for 2 sec.

The control unit is now in operation mode

(settings from factory), in case of power

failure all settings remain unchanged.

Advice:

All menus can be reset by a RESET function to the original

values set by factory. For this carry out the steps described in

the point 'Programming of the basic level'. After the remote

control has been saved, the control unit changes to the

programming menu 'RESET factory settings'.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 250 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 250

Marantec Comfort 250 User Manual - German - 88 pages

Marantec Comfort 250 User Manual - Dutch - 88 pages

Marantec Comfort 250 User Manual - French - 88 pages

Marantec Comfort 250 Installation Guide - All languages - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Comfort 250 Manual

Product: