English Page 19
E. Hand transmitter
GB GB
Change coding
It is possible to change the coding of the remote control, in case a hand
transmitter has gone lost. For this insert the coding plug into the hand
transmitter that has to be re-programmed (fig. E.5).
Step 4:
• Insert the coding plug into the hand transmitter
• Short-circuit one of the outer pins of the coding plug with the centre lead
(e.g. by means of a screwdriver).
• Actuate the desired button on the hand transmitter. The integrated random
program generates a new code. The LED is flashing quickly.
As soon as the LED on the hand transmitter is on permanently, release the
button of the hand transmitter and remove the coding plug.
Advice!
After a new coding of the hand transmitter the garage door
operator has to be re-programmed to the new code, because
the old code is lost irrevocably.
Advice!
For multi-channel transmitters this procedure has to be carried
out separately for every single button.
Advice!
For multi-channel transmitters this procedure has to be carried
out separately for every single button.
