Manual for installation and operation, Comfort 211 GB (#72752) 15
• Push the end of the door link (G) into the door
connector (B).
• Secure the door link (G) using the bolt (H) and the
SL securing clip (I).
• Fix the lintel joining plate (F) as required for your type
of installation.
6. Installation
Depending on the site requirements, there are two
installation possibilities for the lintel joining plate (F):
Mounting to the lintel
6.4 / 6
6.4 / 7
Mounting to the ceiling
6.4 / 5
Caution!
The operator system must be prevented
from falling (e.g. by using the
installation aid (E), Art. No. 66427)
before it has been properly fixed.
• Position the motor unit with the drive boom at the
mid point on the lintel above the door connector.
• Take measures to prevent the operator system from
falling before it has been properly fixed.
6.4 / 8
G
H
I
B
F
F
Attention!
To ensure perfect movement of the
door, the lintel joining plate for the
drive boom must be mounted at the
mid point, above the door connector.
E
At the highest point reached by the door, the upper
edge of the door leaf must be 10 - 50 mm below the
horizontal underside of the drive boom.
The drive boom must be mounted parallel to the door
booms.
• Close the door.
8.0 x 70
A8 / U10
8.0 x 70
A8 / U10
