636202
10
Zoom out
Zoom in
Previous page
1/12
Next page
10 – Door Control AS 210 B / Rev.A 2.0
X10 - Plug-in base for press-and-release
(OPEN + CLOSE)
J1 (OPEN)
J2 (CLOSE)
J1 and J2 must be open when used in connection with the
ZM SKS B add-on circuit card.
ATTENTION!
Incorrect wiring of the connection can result in
malfunctions of the circuit board!
If J2 is inserted, the closing edge safety device does not
issue a stop command in the closing direction.
X11 - Terminal block for brake relay
ATTENTION!
Incorrect wiring of the connection can result in
damage to the circuit board!
To avoid damage to the controls, never connect a jumper to
X11 under any circumstances.
A brake relay can be connected at terminal block X11 by the
manufacturer.
jumper inserted = press-and-release
jumper not inserted = deadman
Dimensions of circuit
board:
167 x 85 x 190 mm
Power supply via L1,
L2, L3, PE:
230 V or 400 V, 50 / 60 Hz; - max. power input
2200 W - 3.2 A; duty cycle 60% for a maximum
running time of 120 s
Fuse protection: 10A K type
Consumption of the
controls alone:
max. 100 mA
Control voltage: 24 V
DC, max. 250 mA; protected by self-
resetting fuse for external sensor systems; all
control voltage inputs are galvanically isolated
from the supply
Control inputs: 24V
DC, all input connections must be potential-
free; minimum signal duration for input control
command >100 ms
Control outputs: 24 V
DC, max. 150 mA
Safety circuit / emer-
gency off:
all input connections must be potential-free;
if the safety circuit is interrupted, no further
electrically powered movement of the drive is
possible, not even in deadman mode.
Input -
safety contact edge:*
for 8.2 kW electrical safety contact edges,
terminating resistor and for dynamic optical
systems
Relay outputs:* if inductive loads are connected (e.g. additional
relays or brakes), they must be tted with ap-
propriate interference suppression devices (free-
wheeling diodes, varistors, resistor-capacitor
elements). Potential-free normally open contact;
min. 10 mA ; max. 230V AC / 4A.
Contacts used once for power switching can
not be subsequently used for connecting small
currents.
Temperature range: In operation: -10°C ... +45°C
In storage: -25°C ... +70°C
Air humidity: up to 80% not condensing
Weight: approx. 1.8 kg
Guidelines: Standards
* Only in connection with the ZM-SKS B add-on circuit card
6. Technical data
Initial operation
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec AS 210 B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec AS 210 B in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec AS 210 B

Marantec AS 210 B Additional guide - English - 8 pages

Marantec AS 210 B Additional guide - German - 8 pages

Marantec AS 210 B User Manual - German - 12 pages

Marantec AS 210 B Additional guide - Dutch - 8 pages

Marantec AS 210 B User Manual - Dutch - 12 pages

Marantec AS 210 B Additional guide - French - 8 pages

Marantec AS 210 B User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info