742648

Marantec AS 100 Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
Operating instructions – AS 100
ENGLISH
Page 3 of 6 Rev.A 07
Connection of mains cable
The circuit distribution protected by fuse has to be connected to the screw
terminals X1, L1, L2, L3 of the mother board. The value of safety fuse
should not exceed 4A.
The mains plug must be accessible and installed near by the control.
The value of the supply voltage (230V AC or 400V AC) must be set at the
screw terminal X6 through the bridge.
A wrong connection of the bridge may destroy the control.
Connection of three-phase drive
The three-phase drive has to be connected to the screw terminals X2, U,
V, W.
Change of sense of rotation: after connecting the drive, the sense of
rotation must be checked with the key buttons OPEN and CLOSED. If the
moving direction does not correspond to the direction of the arrow
indicated on the pressed button, so the screw terminals of the
connections U and V must be exchanged.
Connection of the external instructions switches OPEN, STOP, CLOSED
To operate from outside, a triple switch (such as KDT 3) can be connected
to the screw terminals X3, 4, 5, 6, 7. Optionally, a triple switch can be
connected to through the screw terminal X4. If the block of binding posts
is not configured, so a jumper must bridge the stop contact.
The line of external instruction devices must be installed safe according to
protective earthing (double insulation).
Here both key buttons related to OPEN and CLOSED should be executed
as closer. As the key button related to stop in the safety circuit is already
configured, it must be connected as opener.
The area of danger must be visible since the dead-man operation mode
runs with key buttons.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec AS 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec AS 100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info