753641
23
Zoom out
Zoom in
Previous page
1/50
Next page
23
NOTE: This is thermostatic remote control. The remote should be in the same room as fireplace and placed
on a flat surface. It must be placed away from the fire so the hot air will not blow on it and affect
thermostatic reading.
The communication frequency between the fire and remote has already been set
up. If you cannot use the remote with the fire, please follow instructions
Step.3b.34 to initiate this connection in point.
Standby for Remote Handset
3b.1 The screen shown to the right is when the remote handset is in
standby condition.
Turn on/off
3b.2 Press to turn on the flame effect, turn off flame effect and heater
when in normal mode.
3b.3 Press to turn on/off the flame effect under daily and weekly timer
mode.
Flame Effect
3b.4 Press to enter the flame effect adjustment screen.
3b.5 Press the ‘←’ and ‘→’ button to select the 3 kinds of flame effect.
3b.6 Press the ‘+’ and ‘-’ button to select the 5 brightness of flame effect and OFF
settings.
Normal Mode
3b.10 Normal control mode is factory set. If it is not, then press button until
the logo shows up at the upper right corner of the screen.
3b.11 Press the ‘+’ and ‘-’ button to adjust the setting temperature from 17 to
25 by 2 intervals.
3b.12 Press button to turn on/off heat, ONOFF will show at the
lower of the screen.
NOTE: It is normal for the fan heater to stop running for periods of time. This
happens because the room temperature is at or above the temperature set on the
remote control. The heater indicator will be turned off after 10s if you have the
flame ON. The heater indicator will stay ON if you use the heating function only.
Count Down Timer
NOTE: This setting is only for normal mode. It allows the appliance to go into standby
after a set period of time.
3b.13 Press to cycle through the settings from Off and 0.5 hours to 9 hours.
The timer logo and time will show on the screen. The heater must be in the
ON position.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Manor House Dex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Manor House Dex in the language / languages: Dutch as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info