589962
10
Zoom out
Zoom in
Previous page
1/15
Next page
10
SATELLITE LIST
Press SAT key and the combined channel and satellite list will appear. Select a channel from this list and exit.
SELECTING RADIO CHANNELS
Press TV / RADIO key once and it will change to Radio mode. Press it again to change back to TV mode. Follow
above steps for changing the channel.
CONDITIONAL ACCESS (for models with CI)
IRDETO CARD SLOT -- For models with embedded Irdeto systems.
Insert your card into slot F13 with the card contacts facing down.
UPGRADING SOFTWARE
You can upgrade the software of your receiver when this is available. Your current software version is displayed
in the Data Download menu, Loader Status in OTA Loader menu. There are two ways to upgrade see
below.
ۤ Via satellite using the OTA Loader and OTA Upgrade menus. To upgrade your dish must be positioned
on Hot Bird 1-6 (13.0E). This satellite provides the OTA Upgrade.
۬ Via your PC using a NULL MODEM cable connected to RS232 connector R11. The software is available
on our website: http://www.plaza-st.com
CHECKING SOFTWARE DOWNLOAD VERSION
Go to INSTALL menu and select Data download. Enter your password and select OTA Loader. Then select
Loader Status. The Download Version number is displayed on the second line from top on the right. When
calling for technical help line it may be necessary to refer to this version number.
OTA Loader: This menu is used when upgrading the receiver software via satellite. Go to INSTALL menu and select Data
Download. Then select OTA Loader and finally select OTA Upgrade. See following menus.
Common Interface
After inserting card and CAM slots A or B will initialize, showing the CAM type.
Select the slot you are using and press OK for sub menu.
Follow the menu
instructions for checking or changing any parameters.
Irdeto: For models with Embedded Irdeto. Shows
Irdeto card and Loader
Information. Follow the menu instructions for checking any parameters
TO SELECT A CHANNEL FROM ANOTHER SATELLITE
۩ Use CH and PAGE up / down to scroll through the satellite list
ۻ Press OK on
required satellite, the channel list will change and the
cursor will also move to channel list.
€« Use CH and PAGE up / down to scroll through the channel list
€¬ Press OK on required channel.
The antenna positioner will
automatically move to that satellite. If you are using DiSEqC switch,
then it will switch to that antenna. Finally press EXIT.
Loader Status: Press OK to display detailed software parameters.
OTA Upgrade: Press OK to upgrade software via satellite and follow below menu
NOTE: Upgrading via satellite may take up to 20 minutes.
VIEWING SCRAMBLED CHANNELS
Open the flap (F14) from top an
d you will find two CI
slots behind it. Insert CAM
in either of the slots together
with a valid card as shown below.
To display CAM and
card parameters go to CA Setup.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Manhattan PLAZA ST 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Manhattan PLAZA ST 120 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info