589962

Manhattan PLAZA ST 120 Manual

7
Zoom out
Zoom in
Previous page
1/15
Next page
7
EXAMPLE: To configure four LNB
Astra 2 (28.2E), select LNB No 1 and set DiSEqC to 1
Astra 1 (19.2E), select LNB No 2 and set DiSEqC to 2
Hotbird 1-6 (13E), select LNB No 3 and set DiSEqC to 3
Thor 2, 3 (1W), select LNB No 4 and set DiSEqC to 4
CONFIGURING WIDEBAND LNB
Set LNB No 1 to 14V Skew On (for Low Band Vertical polarity)
Set LNB No 2 to 14V Skew On (for Low Band Horizontal polarity)
Set LNB No 3 to 18V Skew On (for High Band Vertical polarity)
Set LNB No 4 to 18V Skew On (for High Band Horizontal polarity)
NOTE: This receiver does not provide Mechanical Polarizer Output Connectors. Therfore for tuning
Wideband LNB you need to provide external means of adjusting skew on the LNB.
12V: To select 12 volts output for relay type LNB switch.
STORE: After above settings move to store and press OK key
DiSEqC 1.2 menu (Manual positioner)
With DiSEqC 1.2 antenna positioner, you can search and download individual satellites with manual positioning.
LOCATING PRE-STORED SATELLITES
Re-sync:
First find one of the listed satellites manually by obtaining maximum signal and quality. Then select Re-sync
and press OK key. All other listed satellites can now be found automatically during channel search.
STORE: After above settings move to store and press OK key
DiSEqC USALS menu (Automatic positioner)
You can search and download up to 40 satellites at a time automatically using the DiSEqC USALS menu.
0 Position: To move to 0 position on motor
STORE: After above settings move to store and press OK key
CHANNEL SEARCH -- Automatic Scan and Search
Using DiSEqC USALS menu you can search and download up to 40 satellites
automatically at a time. Follow settings below.
Multisat Search: Set index numbers for each satellite you wish to search.
LNB No: If you are using more than one LNB, select LNB No as configured
previously. If you are using one LNB then this may remain as 1.
Satellite: Press OK and select satellite name. Remember that you have to
select a different name for each index number.
EXAMPLE: To configure MONOBLOCK LNB
Astra 1(19.2E), select LNB No 1 and set DiSEqC to Mini-A
Hotbird 1-6(13E), select LNB No 2 and set DiSEqC to Mini-B
In Channel Search menu go to Positioner and select DiSEqC 1.2 and press OK
key. A sub menu will appear.
Move: Move antenna furthest possible East or West and enter the limits below.
East Limit: After furthest East enter the limit here
West Limit: After furthest West enter the limit here
Erase Limits: To clear limits press OK
0 Position: To move to 0 position on motor.
In channel search menu go to Positioner and select DiSEqC USALS and press
OK key. A sub menu will appear.
Longitude: Enter your location using 0-9 keys and then PAGE up / down keys
to enter E (East) or W (West).
Latitude: Enter your location using 0-9 keys and then PAGE up / down keys to
enter N (North) or S (South). EXAMPLE: London –
Longitude = 0 and Latitude
= 51.5N
USALS:
Press OK to move antenna automatically to required satellite.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Manhattan PLAZA ST 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Manhattan PLAZA ST 120 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info