589961

Manhattan PLAZA ST 100 Manual

9
Zoom out
Zoom in
Previous page
1/15
Next page
9
Set Multisat Search 2, LNB No 2 and select horizontal TP from low band. Adjust skew (externally) to - value
for maximum signal and quality.
Set Multisat Search 3, LNB No 3 and select vertical TP from high band. Adjust skew (externally) to + value for
maximum signal and quality.
Set Multisat Search 4, LNB No 4 and select horizontal TP from high band. Adjust skew (externally) to - value
for maximum signal and quality.
Finally press OK key on Start.
ADVANCE SEARCH: Special Feature
This feature is used when you want to search a satellite for any new channels or those not included in the
Database or you do not have the full data of the channel. In INSTALL menu, go to Advance Search
NOTE: Searching with this feature is slower than normal search.
Symbol Rate: Select option. If you select ALL it will scan with all Symbol Rates applicable. To define symbol rate, select
User Defined and press OK. A sub menu will appear. Select and press OK on the symbol rates you wish to apply and
finally EXIT.
Start Freq: Using 0-9 keys, enter the start frequency here. The search will start from this frequency
End Freq: Using 0-9 keys, enter the end frequency here. The search will stop after this frequency
Polarity: select polarity.
Positioner: Select positioner if required. Configure this as described earlier.
Start: Press OK. TP search will start. Below Searching page will appear.
TUNING WIDEBAND LNB (in Advance Search)
NOTE: It is not possible to do index search in Advance Search and therefore each LNB No has to be tuned
individually. Configure LNB as described earlier. Go to Advance Search and perform search for each LNB No
that is pre adjusted for skew by external means.
TO CHANGE CHANNEL OR SATELLITE
There are two ways of changing channel or satellite as below.
SORTING THE CHANNEL LIST
Press Green key to sort channels alphabetically.
Press Yellow key to sort channels Free To Air first followed by Scrambled.
Press Red key to return to normal list.
TO SELECT A CHANNEL WITHIN THE SAME SATELLITE
Press OK key and browser will appear on your screen.
€Ÿ Use CH and PAGE up / down keys to scroll through the list.
€ Press OK on required channel
TO SELECT A CHANNEL FROM ANOTHER SATELLITE
€¡ Use VOL up / down to change the list.
€¢ Use CH and PAGE up / down to scroll through the list
€£ Press OK on required channel
. The antenna positioner will
automatically move
to that satellite. If you are using DiSEqC switch,
then it will switch to that antenna.
LNB No: Select number.
Satellite: Select satellite name.
Search Mode: Select search option. Option + D includes data channels
€¤ ALL - All Video and Radio channels.
€¥ FTA - Free To Air Video and Radio channels
€¦ ALL + D -All Video, Radio and Data channels.
Scan Freq: Select option. If you select All it will scan the complete frequency
related to the LNB type you have selected. To define the frequency, select
User
Defined. This will allow you to enter the frequency on below menu lines.
Shows serial number of TP, Frequency, Symbol Rate (S/R), Polarity and FEC.
After the search for TP has finished, it will start channel search
automatically and display the TV and Radio channels found.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Manhattan PLAZA ST 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Manhattan PLAZA ST 100 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info