15436
8
Zoom out
Zoom in
Previous page
1/41
Next page
Assembling
By rotating the bayonet ring counter clockwise until it stops, the red
dot of the lens coupling mark on the bayonet ring comes to the top, and
the dust cap on the front of the camera body can be removed. At this
position of the bayonet ring, insert the lens, matching the red mark on
the lens to the red mark on the bayonet ring. Then turn the bayonet ring
clockwise, locking the lens in place.
Detaching the lens is done in a reverse order to that described
above.
PRECAUTION !
Do not touch the pin (9) on the camera body used to couple the lens
to the rangefinder.
If the lens is changed while a loaded film holder is attached to the
camera, be sure to insert a dark slide into the holder.
When using the 100mm f/3.5 standard lens, the lens-shutter assembly
must be pulled out from its retracted position before taking general
photographs. Grip the lens-shutter assembly firmly, turn it slightly coun-
terclockwise, and pull it out; then, turn it clockwise (in the arrow direction)
and secure it in place.
If the lens-shutter assembly is left in its retracted position, the
coupled rangefinder will not function even when the two images coin-
cide and form a single image.
Although the lens is not used for normal photography with the lens-
shutter assembly in its retracted position, the lens is designed to allow
its lens-shutter assembly to remain retracted so that it can be used even
when extension rings are used.
Also lens retraction is necessary, when using this lens with another
camera whose back mount can be extended, when taking a picture with
the back mount tilted.
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya UNIVERSAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya UNIVERSAL in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info