15434
38
Zoom out
Zoom in
Previous page
1/43
Next page
Attaching a Lens with Shutter Released or Mirror Raised
When a lens is removed from the camera
body, the mirror is set (lowered) and the lens
shutter cocked. Conversely, when attaching
a lens, the same conditions should prevail
(mirror set and shutter cocked). However,
should a lens be attached with either the mir-
ror raised or shutter released, or both, the
camera can be reset by following the proce-
dures below.
1. If the mirror is raised (regardless of whether
the lens shutter is cocked or released), simply
depress the Cocking Lever to reset the
camera.
2. If mirror is set and lens shutter released
(closed), remove the Dark Slide from Film
Holder and depress the Shutter Release
Button (film will not be exposed). Next,
depress the Cocking Lever to reset the
camera.
3. When a lens is removed from the camera
both the mirror and the lens shutter are
cocked, or they can't be separated. Else-
where we explained how to uncock both.
(For storage, for instance).
4. To rejoin them both have to be in a cocked
state. To cock the camera (lowering the
mirror), just activate the film advance lever,
To cock lens shutter, follow instructions
supplied with lenses.
36
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RZ67proII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67proII in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info