15432
32
Zoom out
Zoom in
Previous page
1/43
Next page
Multiple Exposures
If
you complete step 3 above, but remove the cable re-
lease without making an exposure (step 4), the shutter
will be released as soon as the cable release is re-
moved.
Even when using mirror-up operation,
everytime
the shutter is cocked, the mirror is
relowered.
There-
fore,
it
is possible to check the
viewfinder
before each
frame is exposed.
A convenient
double
cable release is available as
an
accesory.
Since one end of the release screws into
the
Shutter
Release Button and the other end into the
Mirro-up Socket, if is possible to use the same release
to raise the mirror and later release the shutter.
CAUTION
l
As long as a cable release remains attached to the
Mirror-up Socket, it is possible to use the same re-
lease to raise the mirror and later release the shutter.
Photograph by merely pressing the Shutter Release
Button.
l
lf the red line around the Mirror-up Socket
is still visi-
ble when the cable release
is
removed, the camera is
still set for mirror-up operation. If such is the case,
reattach the cable release, making sure that the soc-
ket retracts as you remove it once again.
.
The shutter should be released with the cable re-
lease within 50 seconds of pressing the Shutter Re-
lease Button. If this is not done, the buzzer
will
sound
after 50 seconds and
continue
for
10
seconds before
stopping.
. If
you
release the shutter with the cable release after
the buzzer stops, the shutter speed will be
1/400
sec.
If you wish to use a shutter speed other than
1/400
sec. after the buzzer stops, follow the procedure for
multiple exposure.
Using Bulb with Mirror-up Operation
1. Attach cable release to Mirror-up Socket.
2. Set the Shutter Speed Dial to B
3
.
Press the Shutter Release Button (mirror rises).
4.
Press plunger of cable release (shutter opens).
5. Press Shutter Release Button (shutter closes).
1. Set the R-M Lever to
‘M’
(multiple expo-
sure). The lever can be moved to ‘M’ either be-
fore or after releasing the shutter.
2. Press the Cocking Lever as far as it will go
in order to
cock the shutter and set the mirror.
The film will not move at this time. The shutter
can now be released, creating a double expo-
sure. This procedure can be repeated as often
as desired.
When photographing the same
subject
2 or
more
times exposure compensation is necessary. The
same is true with different
subjects
that are all evenly
illuminated.
With
subjects of
different
brightness, the
darker one is
normally
photographed first. However, it
is not within the scope of this
operating
manual to
teach multiple exposure technique, as many excellent
books dealing with this
subject
are already
available.
After completing your
multiple
exposure, im-
mediately replace the R-M Lever to its normal pos-
tion. If this is not done, the shutter may later be re-
leased mistakenly, not only
ruining
the
multlple
expo-
sure, but also ruining the additional exposure.
30
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RZ67pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67pro in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info