15432
27
Zoom out
Zoom in
Previous page
1/43
Next page
Unloading the Film
1.
Open the back cover of the Film Holder and
remove the Film Insert.
2. While holding down the right-hand Spool
Release Pin, remove the film, exercising care
that the backing paper does not unroll or be-
come loose.
3. In preparation for the future, remove the
empty spool from the
Film
Insert, replacing it on
the right-hand side so that it will act as the new
Take-up Spool.
When the back cover of the holder is opened,
the Exposure Counter will automatically return
to "S" (Start).
If anything other than
‘s’
appears
in the Exposure
Counter,
it
indicates
that there is film in the holder. To
prevent accidental exposure of the
film
to light, always
check the Exposure Counter before opening the back
cover of the
holder.
When desiring to turn in for processing a roll
of film that has been
only partially exposed, first
remove the holder after inserting the Dark
Slide. Next, while holding in the pin in thecenter
of the coupler(A), completely
wind
the
film
onto
the Take-up Spool with the Film Advance
Knob. Instead of
continuously
holding in the
coupler
pin
,
you can push it in once after each
frame, if preferred.
During exposures, the Dark Slide can be
stored in the Dark Slide Slot in the back of the
holder.
The Memo Clip on the back cover can be
used
for
holding
the film
box-top as a film remin-
der or for holding a piece of paper with special
25
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RZ67pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67pro in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info