15432

Mamiya RZ67pro Manual

23
Zoom out
Zoom in
Previous page
1/43
Next page
Loading the Film Holder
Removing the Holder
4. Insert the Dark Slide into the Roll Film Hol-
der. For instant recognition, the Dark Slide Slot
is
bordered by white reference lines.
The Film Holder can be removed after mov-
ing the Holder Lock Lever as far as it will go to-
ward the Lock Release Lever (A). It is recom-
mended that you remove the holder on a table
or similar support, or in your lap, to avoid the
possibility of dropping the
holder or
having it fall
off the camera.
If you attempt to remove the holder without replac-
ing the Dark
Slide,
the Holder Lock
Lever
will
automat-
tically
lock in place. preventing accidental removal of
the holder and exposure of the film.
However, if you must remove the
holder without the
Dark
Slide
in place. the automatic lock can
be overrid
den by pulling
the
Lock Release Lever toward the Hol-
der Lock Lever, holding the
lever
there, and then mov-
ing the Lock Lever.
1. Pull out the upper and lower Back Cover
Latches and the back cover will open.
Because of the double safety lock, pulling out
just one of the two Back Cover Latches will not
open the back cover.
After opening the back cover of
the Roll
Film Holder,
remove the Film Insert. When loading film, it
is not
necessary to remove the holder from the
camera
back.
When loading film, avoid direct sunlight, either load-
ing the film in the shade or
turning
your body away
from
the sun and loading it in the shade of
your own
2. While holding down the left-hand Spool
Re-
lease Pin of the Film
Insert,
fit a roll of film bet-
ween the upper and lower left-hand Film Spool
Studs.
Pull the backing paper in the direction of the
dotted line and arrow around the stud, over the
roller, across the back, over the right-hand rol-
ler, and feed it into the Take-up Spool. When
loaded correctly, the inside of the backing
paper (black side) will appear outside of the in-
sert back. If it does not, remove the roll of film,
turn it upside-down, and reload it.
21
body.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RZ67pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67pro in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info