15424
12
Zoom out
Zoom in
Previous page
1/43
Next page
Removing the lens
1. Set the mirror and cock the shutter by
pushing the cocking lever as far as it will go
toward the front of the camera body.
2.
Rotate the bayonet ring of the lens counter-
clockwise as far as it will go (the white dot on
the bayonet
ring
will align with the central red
mark on the body) and remove the lens.
l If the mirror and the shutter are not cocked
the safety interlock will interfere with the
rotation of the bayonet ring and the lens
cannot be removed.
..,
5.
Waist-level Finder
Releasing the shutter on a lens which
has
been
removed from the body
To release the shutter on a lens which
has been removed from the camera body,
turn the cocking pins
(B)
clockwise, while
pressing the shutter lock pin (A) with a
finger. The cocking pins should be turned
all the way; do NOT leave the pins turned
halfway.
Raising the flnder
Merely lift the back of the finder until it
opens completely.
1010
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RB67proSD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RB67proSD in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info