494220
45
Zoom out
Zoom in
Previous page
1/56
Next page
87 88
1. The selected shutter speed and aperture level can be locked.
See page 79
2. The sync. speed can be set between 1/40 and 1/125 seconds.
Custom settings (C-23 on page 95)
* When the shutter speed is set to 1/2 increments, the sync. speed can be set between 1/45 and 1/125
seconds.
Flash Photography with electronic flash models other
than Metz
1. To use a grip type flashgun or a strobe with
other electric contacts than X contact, connect
the sync. cord to the camera’s sync. terminal.
(See note below about flashes designed exclu-
sively for other makers cameras.)
2. While pressing the unlock button, turn the exposure mode setting dial and set it to “X
(1/125 sec.) or “M” (manual).
When “M” (manual) is selected, turn the front dial and set the shutter speed to 1/125 sec.
or slower.
3. Turn the rear dial to set the aperture, then take the picture.
This camera’s synchro contact is an X contact.
Remove the rubber cover when connecting the sync. cord.
After shooting, be sure to attach the rubber cover in order to protect the synchro
terminal’s contacts.
WARNING
- Using flashes designed exclusively for other maker’s cameras may
damage the camera’s internal mechanisms if connected to the camera's
hot-shoe. In this situation, use an off-camera flash bracket and connect
a sync. cord to the camera's synchro terminal.
- When using flashes with a flash duration of 1/500 sec. or longer, set the
shutter speed to 1/30 sec. or less.
Superimposing Data
This is a function to allow various pieces of shoot-
ing information to be superimposed on the edge
of the film. The info that is superimposed can be
selected from the following three modes. To specify
this function, use the Custom settings (C-02 on
page 93).
This section describes the details of the informa-
tion that can be superimposed.
INDEX mode
(Superimpose only an index number)
DATA/INDEX mode
(Superimpose shooting info and an index number)
When manual exposure is selected and when the exposure metering
difference exceeds ±6EV, "– o –" or "– u –" will be superimposed on
.
Data superimposed in manual mode
DATE/INDEX mode
(Superimpose the date and an index number)
75 64321
321
86 754321
* When the metering mode is selected as AUTO A-S (automatic change between average and spot), and if “A” is
selected, “A” will be superimposed. If “S” is selected, “S” will be superimposed. If “AUTO A-S” is selected, “As” will be
superimposed.
The data superimpose function is available with films having sensitivity from ISO25
to 1600. When using other films, even if the data superimpose function is used, data
will not be superimposed.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 645 AFD III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 645 AFD III in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info