494220

Mamiya 645 AFD III Manual

16
Zoom out
Zoom in
Previous page
1/56
Next page
Caution
: When the pressure plate (120/220) is set erroneously
■ When the pressure plate setting does not correspond to the loaded film a mis-
match between the pressure plate setting and loaded film may result in a focusing
error and/or camera malfunction. Always ensure that the pressure plate setting
corresponds to the loaded film.
4. Attach the empty spool to the
roll-film insert.
Flip open the backing plate E of the lower com-
partment, fit an empty spool to the bearing, and
push the backing plate F back to the original
position.
5. Set a film.
Flip open the backing plate G of the upper com-
partment, set a new roll of film as shown, and
return the backing plate G to the original posi-
tion.
Result
220 type
120 type
120
220
- Inaccurate focusing.
- Film winding after 16 exposures.
- Inaccurate focusing.
- After the 16th exposure has been made, the shutter can be released a
few times until the film's leader paper has run out, but the shutter
blades may be damaged by the leader paper at the film end or by the
film's sticker.
Insert the dark slide in the magazine and press the shutter button and
the emergency film wind button simultaneously. (See page 40)
Plate
Setting
Loaded
Film
E
F
G
C
A
B
D
Loading Film in the Magazine
1. Open the back cover of the
magazine.
Hold down the A button and press the B button
to the right.
2. Take out the roll-film insert.
Pinch the knobs C of the roll-film insert in the
chamber with your fingers and take out the roll-
film inset.
■ When you load a film in the magazine for the
first time, remove the protective paper which
is attached to the pressure plate of the roll-
film insert.
3. Set the film type (120 or 220).
Hold the button D under the knob and turn the
pressure plate. This frees the pressure plate and
permits it to be turned and set for either 120 or
220 film.
★ Be sure to align the lock pins with the holes on the pressure plate. The selected film
type will be visible through the window on the pressure plate and will be displayed
on the LCD of the magazine when the roll-film insert is loaded.
A roll of film can be inserted into the magazine whether the magazine is installed onto
the camera body or not.
29 30
Film path
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 645 AFD III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 645 AFD III in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info