494220

Mamiya 645 AFD III Manual

12
Zoom out
Zoom in
Previous page
1/56
Next page
X
M
T
v
A
v
P
C
F
A
6. After the index number is specified, press the set button A for approximately one
second to store the setting.
★ In the default setting the index number is not imprinted. Change the setting in C-02 of
the custom setting mode (see page 93). If film is not loaded, the index number will not
change.
★ The starting index number can be set at will. For example, when shooting in different
places or for different purposes, you can classify the photos by changing the start-
ing number of any of the digits.
★ Once the last three digits reach 9999, they will restart from 0000 and the thousands
place will be increased by one. 0000 can also be set using the index number setting
procedure.
★ After 60 seconds, the index number setting mode is cancelled and the setting is not
registered to the camera’s memory unless the set button has been pressed.
★ Custom settings remain in the memory even when the shutter release mode selector
lever is set to “L” (turning the power off).
★ When the exposure mode is not set to the CF position and you press the set button
for approximately 2 seconds, you can check the index number for the next frame.
Pressing the set button again will let you to check the “month-date-year” and “hour-
minute” settings.
How to imprint the same index number
It is possible to always imprint the same index number that has been previously set.
The procedure is the same as that taken up to
step 4. of the index number setting procedure.
1. Turn the front dial until “UP” starts blinking.
2. Turn the rear dial until “HL” is displayed.
3. Press the SET button A for about 1 second to
enter the setting.
X
M
T
v
A
v
P
C
F
X
M
T
v
A
v
P
C
F
A
X
M
T
v
A
v
P
C
F
A
21 22
The index numbers are indicated in four digits (0000 to 9999).The index number is stored
in the camera body so that when replacing a series of roll film holders, the camera will
superimpose sequential index numbers on exposures. This is effective when exposing
and managing a large number of rolls of different types of film.
1. Turn on the power.
Set the shutter release mode selector lever to “S”
or “C.”
2. Press and hold down the exposure mode dial
lock-release button. Then, turn the exposure
mode dial to the CF position.
3. Turn the front dial to select custom number C-
35.
The display turns from “C-35” to “Id” immediately.
★ The dial can be turned either way to select the
desired function number.
4. Press the set button
After pressing the set button A you will see the
index setting display.
5. Turn the front and rear dials to set the index
number. (4 digits). Turn the front dial to select a
digit in the index number (the selected digit blinks)
and then change the number by turning the rear
dial.
★ If you st ore the setting with “HL” blinking, the
specified index numbe r wil l be superimposed
on eve ry frame. Set to “UP” if you wish the in-
dex number to be incre ased after eac h shot.
Setting the Index Number
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 645 AFD III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 645 AFD III in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info