296202
30
Zoom out
Zoom in
Previous page
1/44
Next page
AE Lock Mode
When the AEL button “C”
is pressed, the exposure is locked to the value metered at that
time. Use this when the object you want to use for exposure metering and the object on
which you want to focus are different or when you want to take continuous photographs
without changing the exposure.
1. Set the shutter release mode selector lever to “S”.
2. Turn the exposure mode setting dial and se-
lect "P", "Av" or "Tv".
3. Focus on the object you want to use for expo-
sure metering, then with the shutter release button
half-pressed Press the AEL button “C”
once on the
rear of the grip. [ ] appears on the viewfinder's
liquid crystal display panel, indicating that the
exposure is locked.
4. With the shutter release button still half-
pressed, aim the camera to achieve the desired
composition, then release the shutter.
*When the shutter release mode is set to "S"
(single-frame advance mode), the AE lock
mode is canceled when the shutter release
button is pressed. If you wish to take a
series of photos using the AE lock function,
switch the shutter release mode to "C"
(continuous advance mode).
*To cancel the AE lock mode before taking a
photo, press the AEL button “C”
again.
*The focus is locked in "S" mode when the
shutter release button is half-pressed.
*When the AEL button “C”
is pressed in, the
difference between the metered exposure
and exposure with the new composition is
displayed in the viewfinder's LCD panel.
*The AE lock mode is canceled 5 seconds
after the AEL button “C” was pressed.
*If the difference between the set value and the metered value exceeds 6EV,
"
-u-" (under) or "-o-" (over) flashes on the viewfinder's liquid crystal display
NOTE:
After setting the AE lock mode, the front or rear dial can be used to change the
aperture and shutter speed without changing the exposure set with the AE lock
function.
When the exposure mode is set to "P" (program AE), turning one of the dials shifts
the program between PH and PL. When the exposure mode is set to "Av"
(aperture priority AE) or "Tv" (shutter priority AE), turning one of the dials changes
the shutter speed or aperture changes, respectively.
Use of the exposure compensation dial during AE lock will change the shutter
speed in Av Mode and the aperture in Tv Mode. In the "P" Modes, exposure
compensation during AE lock will affect aperture and/or shutter speed, dependant
upon the conditions and the program shift mode selected. In all three situations,
the exposure compensation will be displayed to the left of the exposure settings in
the viewfinder's LCD panel.
How to meter and focus at two different distances
1. First point the camera at the object you want to use for exposure metering, half-press
the shutter release button, then press and hold in the AEL button “C”.
2. Point the camera to achieve the desired composition, half-press the shutter release
button again to refocus, then release the shutter.
57
58
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 645 af at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 645 af in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info