296199
41
Zoom out
Zoom in
Previous page
1/56
Next page
81 82
SET
M.UP
AEL
P
Av
Tv
M
X
CF
SET
M.UP
AEL
P
Av
Tv
M
X
CF
働きます。
Metz Flash SCA3952 System Functions
When using an SCA300 system flash (Metz 60CT-4, 45CL-4, etc.), use the SCA3000C
converter (sold separately).
For details, refer to the operating instructions of the flash and the SCA adapter.
To use the guide number indicated on the flash fully, wait several seconds after the
charging completed indicator lights.
Cautions on using instant film
Instant films (Polaroid 100-600 series and Fuji FP series), have a lower reflectivity
rate than regular film. Exposure compensation is necessary when using the flash in
the TTL mode.
In general, set the exposure compensation to about minus 1 or 1 1/3 EV.
By combined use of a Metz flash and the SCA3952 adapter, the camera adjusts for
flash. It can be adjusted within ±3EV in increments of 1/3 steps.
Flash Compensation Settings
1. Turn on the power
Install the SCA3952 adapter on the Metz flash,
and put it on the camera then lock the flash in
place using the locking knob on the flash shoe.
Turn the shutter release mode selector lever to
the “S” or “C” position, and turn ON the flash
power switch.
2. When the flash charge confirmation lamp
lights, press the set button in. The “ ” is
displayed on the main LCD panel.
3. Turn the front or rear dial to select the flash
compensation value.
1. While in the P or Av modes, the camera can be set to release the
shutter at the metered value, even the background behind the subject is
dark. Custom settings (C-26 on page 93)
2. The sync. speed in the X mode can be set between 1/40 and 1/125
seconds. Custom settings (C-25 on page 92)
* When the shutter speed is set to 1/2 increments, the sync. speed can be set between 1/45 and 1/125
seconds.
For example:
(1) When the size of the subject you want to light with the flash is relatively small within the
picture
(2) When the background behind the subject is extremely bright or when there is a strongly
reflective object in the background
(3) When the background behind the subject is extremely dark (outdoors at night, etc.)
(4) For flash photography with a narrow film latitude
Charging completed
indicator in viewfinder
Automatic setting of
flash synchronizing
speed
Flash compensation
Auto zoom control
Auto AF assist beam
Display of flash range
(distance)
Data transfer
When charging of the flash is completed, a charging completed flash
icon
will illuminate in the viewfinder’s liquid crystal display panel.
When exposure mode is set at “Av” or “P”, the shutter speed will be
automatically set to 1/60 to 1/125 sec. when charging of the flash is
completed.
When exposure mode is at “Tv” or “M” and the shutter speed is at
faster than 1/125 sec., the shutter speed will be automatically set to
1/125 sec.
The flash charge mark flashes after the shutter is released to
indicate that the flash was emitted properly.
The power zoom reflector is linked to the lens focal length. (Exclud-
ing the Metz 32Z-2)
When the focus mode is set to “S”, the auto focus assist beam is
emitted automatically in low light. (Excluding the Metz 32Z-2)
Displayed on the flash’s liquid crystal display panel. (Excluding the
Metz 32MZ-3 and Metz 32Z-2)
The film sensitivity data, exposure compensation data and aperture
data are sent from the camera to the flash.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 645 af d ii at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 645 af d ii in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info