15418
24
Zoom out
Zoom in
Previous page
1/35
Next page
1. Align
0
on the shutter speed dial with
the white line index mark on the camera
body.
2.
Be
sure to set the exposure compensa-
tion scale to 0.
3. Set the aperture to the desided
"f"
number according to conditions.
4. When the shutter release button is
slightly
touched, an LED indicating proper
exposure will automatically light in the view-
finder. When
"
"
LED blinks,
it
indicates
over-exposure. Rotate the aperture ring to
stop down to a smaller exposure until an
LED indicates proper exposure.
f
Blinking "LT" indicates under-exposure:
rotate
the aperture ring until the LED stops blinking to
increase exposure.
t
Illuminating
"LT"
indicates
that
the shutter is set
for a relatively
long
exposure
from
between 1 to
4
seconds.
When taking pictures at such
slow
speeds, be
careful not to move or vibrate the camera. Either
open the aperture for a higher shutter
speed,
or
use a tripod, or
use
a flash.
l
Under AE (automatic exposure) or AEL
(AE lock), the
LED display in the viewfinder will
continue to Operate as long as the shutter
re-
lease button is touched slightly. When you
take your
finger
off
the
button.
the
LEDs
will
go out.
Rotate the shutter speed dial until
“m
aligns with the
white
index mark on the
camera
body.
Position the important part of your subject in
the central square of the viewfinder
-
this
will establish the correct exposure. Then
touch the shutter release button slightly and
an LED will light indicating the correct expc-
sure. After making any necessary adjust-
ments to the aperture, press completely for
your exposure. Even when light quality is
variable, an optimum exposure is possible.
If you cannot get close enough to your sub-
ject for another meter reading, make substi-
tute measurements by pointing the camera
to light and dark areas and calculate a
mean exposure value or try taking a reading
off your palm.
23
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya 6 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info