732860
38
Zoom out
Zoom in
Previous page
1/40
Next page
6.1 Faults Description
Faults
Likely Cause
What to do
EXVAC680S can
not be charged
.
EXVAC680S is stuck
during work.
EXVAC680S goes
back to recharge
without finishing the
cleaning work.
EXVAC680S does
not work as
scheduled
Remote control
malfunctions (Range
is 5 m)
EXVAC680S works
with irregularities
map.
The electrodes between the main body and
the charging base are not contacted properly.
Make sure that the electrodes contacted well.
Check the adapter, always keep the
charging base in power.
EXVAC680S will try to get itself out .Please
start EXVAC680S in a new location if it failed.
The charging base didn’t plug with the
power.
EXVAC680S may be stuck by wires/cables
on the ground,hanging curtains or obstacles
around the carpets.
EXVAC680S’ battery is lower.
EXVAC680 works at different floors with
various speeds
The robot is not switched on.
EXVAC680S is stuck or twined by obstacles.
The remote control is short of power.
EXVAC680S is short of power.
The infrared ray is blocked.
The wheels and the floors may slip due to
climbing small steps, thresholds and doors.
Interference emitted by other devices.
EXVAC680S Work on a waxed, polished floor
or smooth floortile.
The cables, wires, slippers on the ground
affect the working of EXVAC680S.
Wipe the infrared emitter on the remote
control or the infrared receiver on the robot
with clean cotton cloth.
Avoid using the remote control near other
infrared devices.
It is recommended to close the door in the area
and clean the area separately. The robot has the
function of self-identification single room. It will
return to the starting poin after cleaning.
It is recommended to do the cleaning work after
the floor has dried.
Please remove the unnecessary objects on the
floor before cleaning.
Check the battery power and charge it.
Change new battries for the remote control
The power level of EXVAC680S is too low to
work
Check the battery power and charge it.
Ensure the side brushes,side wheels,main
brushes and dust box work well. Restart the
EXVAC680S in a new location.
Switch on the robot.
Reboot EXVAC680S, and start the working
again.
Check the battery power and charge it.
Common Faults
35
Note: If the above methods can not solve the problem,please reboot the robot.
If the problem can not be solved by reboot, please contact sales@mamibot.com.
38


Need help? Post your question in this forum.

Forumrules
1

Forum

mamibot-exvac680s

Reset search

  • I bought a used EXVAC680s robot, how can I restore to factory settings. Submitted on 4-4-2022 at 15:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamibot EXVAC680S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamibot EXVAC680S in the language / languages: English as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info