691020

Makita WST06 Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
7
Models:
LS0714, LS0815, LS1013, LS1016, LS1017, LS1018,
LS1212, LS1214, LS1216, LS1030N, LS1040, LS1220,
LS1221, BLS713, DLS713, DLS714, MT230, M243,
MLS100, MLS101G
Inclusive of models followed by F, L and FL, if any.
Symbols
................ Pay particular attention.
................ Read instruction manual.
................ Maximum allowable loading
CAUTION:
• Read and thoroughly understand this manual and the
instruction manual before use.
• Before installing a tool on this stand, always switch off
and unplug the tool.
• Use only with Makita model indicated in the instruction
manual.
• Before operating the tool, secure it to stand using bolts.
• Make sure that the miter saw is firmly tightened by the
lock lever before operating the tool.
• Do not use the stand on uneven or unstable surface.
• Do not climb, sit or stand on the stand.
• When storing miter saw stand, never lean it against the
wall or the like lengthwise or sideways.
• Remove the miter saw when transporting the stand.
Modèles :
LS0714, LS0815, LS1013, LS1016, LS1017, LS1018,
LS1212, LS1214, LS1216, LS1030N, LS1040, LS1220,
LS1221, BLS713, DLS713, DLS714, MT230, M243,
MLS100, MLS101G
Comprend les modèles suivis de F, L et FL, le cas échéant.
Symboles
................ Soyez particulièrement vigilant.
................ Reportez-vous au manuel d’instructions.
................ Charge maximale permissible
ATTENTION :
• Avant d’utiliser l’appareil, vous devez lire et
comprendre parfaitement le présent manuel et le
manuel d’instructions.
• Avant d’installer l’outil sur ce chariot, vous devez
couper le contact et débrancher l’outil.
• Utilisez uniquement le modèle Makita indiqué dans le
mode d’emploi.
• Avant d’utiliser l’outil, fixez-le au chariot à l’aide de
boulons.
• Assurez-vous que le levier de verrouillage maintient la
scie à coupe d’onglet bien serrée avant d’utiliser l’outil.
• N’utilisez pas le chariot sur une surface irrégulière ou
instable.
• Ne montez pas sur le chariot, ne vous asseyez pas et
ne vous appuyez pas dessus.
• Lorsque vous entreposez le chariot pour scie à coupe
d’onglet, ne l’adossez jamais contre un mur ou une
paroi similaire, ni verticalement, ni horizontalement.
• Retirez la scie à coupe d’onglet lors du transport du
chariot.
Modelle:
LS0714, LS0815, LS1013, LS1016, LS1017, LS1018,
LS1212, LS1214, LS1216, LS1030N, LS1040, LS1220,
LS1221, BLS713, DLS713, DLS714, MT230, M243,
MLS100, MLS101G
Einschließlich der Modelle mit F, L und FL.
Symbole
................ Bitte unbedingt beachten.
................ Lesen Sie die Betriebsanleitung!
................ Maximal zulässige Last
ACHTUNG:
• Lesen Sie die vorliegende Anleitung und die
Betriebsanleitung vor der Verwendung sorgfältig durch.
• Bevor Sie ein Werkzeug auf diesem Untergestell
befestigen, schalten Sie stets das Werkzeug aus und
ziehen Sie den Netzstecker.
• Verwenden Sie das Untergestell ausschließlich mit den
in der Betriebsanleitung angegebenen Makita-Modellen.
• Befestigen Sie vor der Inbetriebnahme das Werkzeug
mit den Bolzen am Untergestell.
• Achten Sie vor der Inbetriebnahme des Werkzeuges
darauf, dass die Gehrungssäge mit dem Feststellhebel
sicher befestigt wurde.
• Verwenden Sie das Untergestell nicht auf einer
unebenen oder instabilen Oberfläche.
• Steigen, setzen oder stellen Sie sich nicht auf das
Untergestell.
• Lehnen Sie zur Aufbewahrung das Untergestell
niemals längs oder seitwärts gegen eine Wand oder
Ähnliches.
• Entfernen Sie die Kapp- und Gehrungssäge, bevor Sie
das Untergestell transportieren.
Modelli:
LS0714, LS0815, LS1013, LS1016, LS1017, LS1018,
LS1212, LS1214, LS1216, LS1030N, LS1040, LS1220,
LS1221, BLS713, DLS713, DLS714, MT230, M243,
MLS100, MLS101G
Compresi i modelli seguiti da F, L e FL, se presenti.
Simboli
................ Prestare particolare attenzione.
................Leggere il manuale di istruzioni.
................ Carico massimo consentito
ATTENZIONE:
• Prima dell’uso, leggere attentamente il presente
manuale e il manuale di istruzioni.
• Prima di installare un utensile sul supporto, spegnere e
scollegare l’utensile.
• Utilizzare il supporto solo con i modelli di utensile
Makita indicati nel manuale di istruzioni.
• Prima di azionare l’utensile, assicurarlo al supporto
mediante i bulloni.
• Prima di azionare l’utensile, verificare che la sega
circolare sia assicurata saldamente dalla leva di blocco.
• Non utilizzare il supporto su una superficie non piana o
instabile.
• Non salire, sedersi o appoggiarsi al supporto.
ENGLISH
FRANÇAIS
(xxx lbs.)
xxx Kg
MAX.
(xxx lbs.)
xxx Kg
MAX.
DEUTSCH
ITALIANO
(xxx lbs.)
xxx Kg
MAX.
(xxx lbs.)
xxx Kg
MAX.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita WST06 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita WST06 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info