Manual Makita VC2510L (page 12 of 68) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

598792

Zoom out

Zoom in

1/68

suction force will weaken and the motor may be

broken.

• Do not grab the hook when emptying the tank.

Grabbing the hook may cause the hook to break.

Unhook and lift up the tank cover. (Fig. 26)

Shake off the dust from powder filter, damper and prefilter

and then take the polyethylene bag out of the tank.

(Fig. 27)

NOTE:

• Take the polyethylene bag carefully out of the tank so

that the polyethylene bag cannot be caught and torn by

the protrusion inside the tank when emptying it.

• Empty the polyethylene bag before it becomes full. Too

much dust in the tank may cause the polyethylene bag

to be torn.

Installing powder filter (Fig. 11)

Place the prefilter in the tank.

Next, mount the damper on the powder filter and then

place it in the prefilter.

When installing powder filter and prefilter, the mounting

position marking on each of them are aligned with that

one at the top of the tank.

Finally, mount the tank cover.

NOTE:

• Models VC2510L and VC3210L have no mounting

position marking and no need to align it.

• Before using the powder filter, make sure that prefilter

and damper are always used together. It is not allowed

to install powder filter solely.

• Before using the paper pack, make sure that powder

filter, damper and prefilter are always used together.

Carrying the cleaner (Fig. 28)

When carrying the cleaner, carry it by holding the handle

on the head as shown in the figure. The handle is

retractable at the head when not in use.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Storage of power supply cord

For Model VC1310L only (Fig. 29 & 30)

Pull out the cord hook or open the base hook. Wind up the

power supply cord and hang it on the cord hook or wind it

around the base hook.

NOTE:

• Do not force the power supply cord off the cord hook

when trying to disconnect it from there. Forcing power

supply cord to disconnect from the cord hook may

cause damage to the cord.

For Models VC2510L and VC3210L (Fig. 31 & 32)

Wind up the power supply cord around the base hook.

Storage of accessories

NOTE:

• Do not apply an excessive force to the accessories that

are held by the pipe holder. Applying an excessive

force to these accessories may cause damage to the

pipe holder.

For Model VC1310L only (Fig. 33)

Pipe holder can be used to store straight pipe, bent pipe,

corner nozzle and similars by just inserting these

accessories.

The pipes can be placed into the pipe holder when also

stopping using the cleaner on the way for a while.

(Fig. 34)

For Models VC2510L and VC3210L (Fig. 35)

Pipe rest can be used to store straight pipe, bent pipe and

others by just inserting these accessories. (Fig. 36)

The pipes can be placed into the pipe holder when also

stopping using the cleaner on the way for a while.

Cleaning

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Clogged powder filter, prefilter and damper cause poor

suction performance. (Fig. 37)

Clean out the filters and dampers from time to time.

To remove dust or particles adhering to the filters, shake

the frame bottom quickly several times.

Occasionally wash the powder filter in water, rinse and dry

thoroughly in the shade before use. Never wash filters in a

washing machine. (Fig. 38)

NOTE:

• Do not rub and scratch the powder filter, the prefilter or

the damper with hard objects such as a brush and a

paddle.

• The filters are consumable and are recommended to

have some spares for them.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

•Hose

• Front cuffs (22, 24, 38)

• Straight pipe

• Corner nozzle

• Round brush

• Powder filter (For dry type)

• Damper

• Prefilter

• Nozzle assembly

• Bent pipe

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC2510L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita VC2510L Manual

Product: