Manual Makita VC2211M (page 10 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

600418

Zoom out

Zoom in

1/76

1. Storing the power supply cord (Fig. 5)

NOTICE:

• Do not use the cleaner or a connected electric

power tool with a power supply cord wound on the

base hook. Using the cleaner or the connected electric

power tool with power supply cord may cause damage

the power supply cord.

2. Storing the front cuffs (Fig. 6)

Front cuffs 22, 24 and 38 can be stored (up to two at a

time).

3. Storing the hose (Fig. 7)

4. Resting a reasonable size of electric power tool

for the base hook, such as circular saw. (Fig. 8)

Locking or unlocking the caster (Fig. 9)

To lock the caster with a stopper, lower the stopper lever

and the caster no longer will rotate. To release the caster

from the locked position, raise the stopper lever.

Locking the caster is convenient when storing the cleaner,

stopping the work on the way and keeping the cleaner

still.

To operate the stopper, move it by hand.

NOTICE:

• When moving the cleaner, make sure that the caster is

unlocked. Moving the cleaner with the caster in the

locked position may cause damage to the caster.

Cap

There is a cap on the mounting port. The cap prevents the

vacuumed dust from getting out from the cleaner.

ASSEMBLY

WARNING:

• This unit may contain hazardous dust. When replacing

filter elements and dust bag, always use a

P2-respirator.

• Always be sure that the cleaner is switched off and

unplugged before carrying out any work on the cleaner.

• Never switch on until all filters and dust bag are

completely installed and the volume flow control is

tested.

Installing and disposing the filter bag

WARNING:

• Always use a P2-respirator.

• When using the filter bag, also use the air filter together

that is preinstalled on the tool. Failure to use the air

filter together may cause unusual noise and heat,

resulting in a fire.

CAUTION:

• Never pick up water or other liquids or wet dusts when

using the filter bag. Picking up such things may cause

the filter bag breakage.

1. Extend the filter bag. (Fig. 10)

2. Align the filter bag opening with the dust suction

opening of the cleaner. (Fig. 11)

3. Insert the cardboard of the filter bag onto the tool so

that it is positioned at the end beyond the detent

protrusion.

When disposing the filter bag, pull the edge on the filter

bag’s mouth so that the mouth is closed by a paper.

Installing polyethylene bag

Cleaner can also be used without polyethylene bag.

However, using polyethylene bag is easier to empty the

tank without letting your hands dirty.

Spread the polyethylene bag in the tank. Insert it between

the holder plate and the tank, and pull it to the hose inlet.

(Fig. 12)

Spread the bag around the top of the tank. (Fig. 13)

Hook up the other side of the bag around the top of the

tank so that the prefilter hook can catch and hold it

securely.

NOTE:

• A polyethylene bag available on the market can be

used. The 0.04 mm or thicker one is recommended.

• Too much dust will tear the bag easily, so do not collect

the dust more than the half of the bag capacity.

Disposing the polyethylene bag

WARNING:

• Always make sure that the cleaner is switched off and

unplugged before emptying the polyethylene bag.

Failure to do so may cause an electric shock and

serious personal injury.

CAUTION:

• Do not apply a great impact on the air filter and tank.

Applying a great impact may cause deformation and

damage to air filter and tank.

• Empty the tank at least once a day although this

depends on picked-up dust volume in the tank. Or, the

suction force will weaken and the motor may be

broken.

• Do not grab the hook when emptying the tank.

Grabbing the hook may cause the hook to break.

Unhook and lift up the tank cover. (Fig. 14)

Take the polyethylene bag out of the tank. (Fig. 15)

NOTE:

• Take the polyethylene bag carefully out of the tank so

that the polyethylene bag cannot be caught and torn by

the protrusion inside the tank when emptying it.

• Empty the polyethylene bag before it becomes full. Too

much dust in the tank may cause the polyethylene bag

to be torn.

Connecting a hose

CAUTION:

• Never force the hose for bending or stamp it. Never

move the cleaner by a hose. Forcing, stamping and

pulling the hose may cause a breakage or deformation

of the hose.

• When picking up large wastes such as planer carvings,

concrete dusts or similar other than small wastes, use

the 38 mm inner diameter hose (optional accessory).

Using the 28 mm inner diameter hose may cause a

hose stuffing and damage.

• Always put the cap on the mounting port whenever you

remove the hose from the tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC2211M in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita VC2211M Manual

Product: