711046
8
Zoom out
Zoom in
Previous page
1/21
Next page
8
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Symbols
END108-2
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
... Read instruction manual.
............... Warning! The cleaner may contain
hazardous dust.
............... Never stand on the cleaner.
Intended use
ENE016-1
The tool is intended for collecting both wet and dry dust.
Power supply
ENF001-1
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and three-
pole receptacles which accept the tool’s plug.
1. Suction force adjusting knob
2. Switch lever
3. Cap
4. Power supply cord
5. Holder
6. Base hook
7. Front cuffs
8. Hose
9. Caster
10. Stopper lever
11. FREE position
12. LOCK position
13. Tank cover
14. Powder filter
15. Damper
16. Prefilter
17. Tank
18. Mounting position marking
19. Water filter
20. Rubber holder
21. Paper pack
22. Cord hook
23. Press
24. Pipe holder
25. A section
26. Hooks
27. Press with a force and lower
28. Protrusion of the pipe holder
29. Groove
30. Hook
31. Holder plate
32. Polyethylene bag
33. Handle
34. Head
35. Cord hook
36. Straight pipe
37. Corner nozzle
38. Stopper
Model VC1310L / VC2510L / VC3210L
EU AU/NZ
GB
110V
GB
230V
CL AR
Voltage Volt 230 - 240 230 - 240 110 230 - 240 220 230 - 240
Power consumption Watt 1,050 1,050 1,050 1,050 1,050 1,050
Connected load
for appliance socket
Watt
at symbol mode
2,400 1,200 600 1,900 2,200 1,100
Connected load
for appliance socket
Watt
at symbol mode
2,600 1,400 850 2,100 2,500 1,400
Total connected load Watt 3,450 2,250 1,650 2,950 3,250 2,150
Model VC1310L VC2510L VC3210L
Volume flow (air) 2.0 m
3
/min.
Vacuum 22 kPa
Protection class 1
Type of protection IP X4 (splash-proof)
Recoverable capacity
Dust 13L 25L 32L
Water 7L 14L 27L
Dimensions (L x W x H)
366 mm x 334 mm x 420 mm 432 mm x 416 mm x 451 mm 552 mm x 398 mm x 685 mm
Net weight 9.6 Kg 10.5 Kg 14.5 Kg
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita VC1310LX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC1310LX1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info