Manual Makita VC 2010L (page 13 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

448706

Zoom out

Zoom in

1/88

SLO

RUS

EST

Makita VC2010L

Important safety instructions

Before using the vacuum cleaner, always read the operating instructions and keep them readily

available.

Purpose and intended use

The appliance must

– only be used by persons, who have been instructed in its correct usage and explicitly com-

missioned with the task of operating it

– only be operated under supervision

– not be used by children

The vacuum cleaners described in this operating manual are suitable for

– sucking up dust and li quids

– commercial use, e.g. in hotels, schools, hospitals, factories, shops, ofﬁces and rental businesses.

– separation of dust with an exposure limit of greater than 1 mg/m³, (dust class L).

Besides the operating instructions and the binding accident prevention regulations valid in the country

of use, observe recognised regulations for safety and proper use.

When dust removers are used, the rate at which air is exchanged in the room must be adequate if the

exhaust air from the vacuum cleaner is blown into the room (please observe regulations valid in your

country).

The following materials should not be picked up by the vacuum cleaner

– hot materials (burning cigarettes, hot ash, etc.)

– ﬂammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.)

– ﬂammable, explosive dust (e.g. magnesium dust, etc.)

Before start-up

Before starting work, the operating staff must be informed on

– use of the vacuum cleaner

– risks associated with the material to be picked up

– safe disposal of the picked up material

Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power

supply. It is recommended that the vacuum cleaner should be connected via a residual current circuit

breaker.

Inspect power cord regularly to detect signs of damage, e.g. cracks or ageing. If the power cord is

damaged, it must be replaced by Makita Service or an electrician to avoid danger before use of the

vacuum cleaner is continued. Use only the type of power cord speciﬁed in the operating manual. Never

use the vacuum cleaner if the ﬁlter is damaged.

Picking up liquids

Before liquids are picked up, always remove the ﬁlter bag. Check that the ﬂoat works properly. If foam

develops or liquid emerges, stop work immediately and empty the dirt tank.

Cleaning the ﬁlter element

If suction performance drops:

1. Switching on the vacuum cleaner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita VC 2010L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita VC 2010L Manual

Product: