Manual Makita UT 1305 (page 5 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448704

Zoom out

Zoom in

1/40

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action (Fig. 1)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To start the tool, simply pull the switch trigger. Release the

switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Indicator lamp (Fig. 2)

The green power-ON indicator lamp lights up when the

tool is plugged to the mains. If the indicator lamp is lit but

the tool does not start even if the tool is switched ON, the

carbon brushes may be worn out, or the motor or the

switch may be defective. If the indicator lamp does not

light up, the mains cord or the indicator lamp may be

defective. When the mains cord is defective, the tool nei-

ther starts nor lights the indicator lamp. When the indicator

lamp is defective, the tool starts without the indicator lamp

lighting up.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing shaft (Fig. 3 & 4)

Tighten the shaft with hex. Nut into the shaft holder as far

as the hex nut comes into contact with the holder. Hold

the notch in the shaft holder with wrench 19 so that it can-

not revolve. With the notch held so, tighten the hex nut

with another wrench 19 in the direction of arrow.

Installing mixing blades (Fig. 5)

To mount the mixing blade, install it with the “UP” mark on

it facing the tool (directing inside). Install the mixing blade

on the top of shaft and secure it with hex. bolt. (Fig. 6)

In case of mixing blade 150 (accessory), screw it directly

on the top of shaft as it is threaded.

OPERATION

Mixing

CAUTION:

• Do not use to mix flammable material such as paint

with thinner used as solvent. Failure to do so may

cause injury.

• Mixing with the mixing blade floating out of the mixing

material may cause the material to splash about.

1. Hold the rear handle of the tool with one hand and the

grip with the other hand firmly, place the mixing blade

under material fully and turn on the tool after making

sure work site safety.

2. Move the mixing blade up and down during the mixing

operation so that whole part of material can be mixed.

3. When finishing mixing, turn off the tool, make sure that

the mixing blade has come to a complete stop, and

then pull it out of the vessel.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Replacing filter (Fig. 7)

Replace the filter regularly as the cooling efficiency of the

tool is reduced due to built-up dust or particles in the filter.

Insert the slotted bit screwdriver and the like between the

tool and the cover as shown in the figure. Lift it up just like

using a shovel and remove the cover.

Replace the filter in the cover with a new one.

Reinstall the cover on the tool.

Replacing carbon brushes (Fig. 8)

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only

identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps. (Fig. 9)

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Mixing blades

• Shaft

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UT 1305 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UT 1305 Manual

Product: