Manual Makita UR2300 (page 8 of 29) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish)

691022

Zoom out

Zoom in

1/29

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or

seriousinjury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

darkareasinviteaccidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

ammable liquids, gases or dust. Power tools

createsparkswhichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractionscancauseyou

tolosecontrol.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduceriskofelectricshock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. Thereisanincreasedriskofelectric

shockifyourbodyisearthedorgrounded.

6. Do not expose power tools to rain or wet

conditions. Waterenteringapowertoolwillincrease

theriskofelectricshock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increasetheriskofelectricshock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Useof

acordsuitable for outdoor use reducestheriskof

electricshock.

9. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. UseofanRCDreducestherisk

ofelectricshock.

10. Use of power supply via a RCD with a rated

residual current of 30 mA or less is always

recommended.

Personal safety

11. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

mayresultinseriouspersonalinjury.

12. Use personal protective equipment. Always wear

eye protection. Protectiveequipmentsuchasdust

mask, non-skid safety shoes, hard hat, or hearing

protectionusedforappropriateconditionswillreduce

personalinjuries.

13. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking up

or carrying the tool. Carryingpowertoolswithyour

ngeronthe switch or energising power tools that

havetheswitchoninvitesaccidents.

14. Remove any adjusting key or wrench before

turning the power tool on. Awrenchorakeyleft

attached to a rotating part of the power tool may

resultinpersonalinjury.

15. Do not overreach. Keep proper footing and

balance at all times. Thisenablesbettercontrolof

thepowertoolinunexpectedsituations.

16. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Looseclothes,jewellery

orlonghaircanbecaughtinmovingparts.

17. If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collectioncanreducedust-relatedhazards.

Power tool use and care

18. Do not force the power tool. Use the correct

power tool for your application. Thecorrectpower

tool will do the job better and safer at the rate for

whichitwasdesigned.

19. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlledwiththeswitchisdangerousandmustbe

repaired.

20. Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measuresreducetheriskofstartingthepowertool

accidentally.

21. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Powertoolsaredangerousinthehands

ofuntrainedusers.

22. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Manyaccidentsarecausedby

poorlymaintainedpowertools.

23. Keep cutting tools sharp and clean. Properly

maintainedcuttingtoolswithsharpcuttingedgesare

lesslikelytobindandareeasiertocontrol.

24. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Useofthepowertoolfor

operationsdifferentfromthoseintendedcouldresult

inahazardoussituation.

Service

25. Have your power tool serviced by a qualied

repair person using only identical replacement

parts. Thiswillensurethatthesafetyofthepower

toolismaintained.

26. Follow instruction for lubricating and changing

accessories.

27. Keep handles dry, clean and free from oil and

grease.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UR2300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UR2300 Manual

Product: