Manual Makita UM603D (page 10 of 100) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690689

Zoom out

Zoom in

1/100

10 ENGLISH

WARNING:

Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclaredemission

value depending on the ways in which the tool is used.

WARNING:Besuretoidentifysafetymeasures

toprotecttheoperatorthatarebasedonanestima-

tionofexposureintheactualconditionsofuse(taking

accountofallpartsoftheoperatingcyclesuchas

thetimeswhenthetoolisswitchedoffandwhenitis

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool.Failuretofollowallinstructionslistedbelow

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Cordless Grass Shear Safety

Warnings

General instructions

1. To ensure correct operation, user has to read

this instruction manual to make himself famil-

iar with the handling of the equipment.Users

insufcientlyinformedwillriskdangertothem-

selves as well as others due to improper handling.

Never allow children, persons with reduced phys-

ical, sensory or mental capabilities or lack of

experience and knowledge or people unfamiliar

with these instructions to use the machine, local

regulations may restrict the age of the operator.

Use the equipment with the utmost care and attention.

Operate the equipment only if you are in good

physical condition. Perform all work calmly and

carefully. Use common sense and keep in mind that

the operator or user is responsible for accidents or

hazards occurring to other people or their property.

5. Never operate the machine while people, espe-

cially children, or pets are nearby.

The motor is to be switched off immediately in case that

the equipment shows any problem or abnormal sign.

Switch off and remove the battery cartridge when

resting and when leaving the equipment unat-

tended, and place it in a safe location to prevent

danger to others or damage to the equipment.

Avoid using the machine in bad weather condi-

tions especially when there is a risk of lightning.

Personal protective equipment

1. Wear eye protection and stout shoes at all

times while operating the machine.

2. Always wear substantial footwear and long

trousers while operating the machine.

Starting up the equipment

Make sure that there are no children or other people

nearby, also pay attention to any animals in the

working vicinity.Otherwisestopusingtheequipment.

Before use always check that the equipment is

safe for operation. Check the security of the cut-

ting tool and the guard and the switch trigger/lever

for easy and proper action. Check for clean and

dry handles and test the function of the start/stop.

Check damaged parts before further use of the

equipment. A guard or other part that is dam-

aged should be carefully checked to determine

that it will operate properly and perform its

intended function. Check for alignment of mov-

ing parts, binding of moving parts, breakage of

parts, mounting, and any other condition that

may affect its operation. A guard or other part

that is damaged should be properly repaired

or replaced by our authorized service center

unless indicated elsewhere in this manual.

4. Switch on the motor only when the hands and

feet are away from the cutting tool.

5. Before starting make sure that the cutting tool

has no contact with any objects.

Method of operation

1. Only use the equipment in good light and

visibility. During the winter season beware

of slippery or wet areas, ice and snow (risk

of slipping). Always ensure a safe footing on

slopes and be sure to walk and never run.

2. Take care against injury to feet and hands from

the cutting tool.

Never stand on a ladder and run the equipment.

4. Never climb up into trees to perform cutting

operation with the equipment.

5. Never work on unstable surfaces.

Remove sand, stones, nails etc. found within the

working range. Foreign particles may damage the

cuttingtoolandcancausedangerouskick-backs.

7. Should the cutting tool hit stones or other hard

objects, immediately switch off the motor and

inspect the cutting tool.

8. Inspect the cutting tool at short regular inter-

vals for damage (detection of hairline cracks

by means of tapping-noise test).

9. Before commencing cutting, the cutting tool

must have reached full working speed.

10.

The cutting tool has to be equipped with the

appropriate guard. Never run the equipment with

damaged guards or without guards in place!

11.

All protective installations and guards supplied with

the equipment must be used during operation.

12. Always remove the battery cartridge from the

equipment:

—

whenever leaving the equipment unattended;

— before clearing a blockage;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UM603D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UM603D Manual

Product: